Overview
Curt Manufacturing part number 22178 is a quantity of two bearing protectors sized for a hub dust cover bore diameter of 1.78 in. The universal fit label is general, so confirm the bore diameter against your hub before fitting.
Key features
- Quantity of 2 in the package
- Stated fit for a hub dust cover bore diameter of 1.78 in
- Labeled universal fit
- Part number 22178 from Curt Manufacturing
Measuring your hub bore
Bearing protectors sit in the hub dust cover bore, so the fit depends on the opening size more than on the vehicle name. Measuring first saves time and avoids forcing a part that will not seat square. Clean the bore and remove grease or rust before taking the measurement so the reading reflects the true opening.
Check that the protector sits flush and turns freely without wobbling. A loose fit can work out during use, and a tight fit can crack the part when it is pressed in. Inspect the hub seal and bearing area for wear as well, since a damaged seal can let dirt reach the bearing even with a protector installed. Replace any protector that is cracked, warped or no longer seated evenly.
- Measure at the widest point
- Compare with the 1.78 in reference
- Inspect the hub seal during install
Specifications
| Brand | Curt Manufacturing |
|---|---|
| Part number | 22178 |
| UPC | 612314626786 |
| Quantity | 2 |
| Hub dust cover bore diameter | 1.78 in |
| Fit label | Universal Fit |
Vehicle fitment
Fitment is general, with a universal fit label and no specific vehicle named. The 1.78 in bore diameter decides whether the protectors suit a given hub, so measure before fitting.
Measure the hub dust cover bore on your vehicle and compare it with 1.78 in before fitting. Confirm your vehicle’s year, model and trim before ordering.
What’s included
Two bearing protectors (quantity 2).









