Overview
The Auto Ventshade Ventvisor in Dark Smoke, part number AVS94806, is a 4-piece set of tinted side window deflectors for the 2019–2026 Ram 1500. Ventvisors sit on the outside of the door glass, so the window can stay cracked for airflow while rain stays out of the cab.
The Ventvisor is a signature design made in the USA and cut to a precise fit. Each deflector uses pre-applied 3M automotive-grade adhesive above and around the window instead of brackets or screws, so no brackets or screws are needed. The smoke tint is darker than a clear deflector and gives the truck a subdued look from the outside.
Key features
- Lets fresh air circulate through open windows while keeping rain out.
- Helps clear stale air and odors from the cab.
- Cuts interior wind noise and reduces mirror fogging.
- Provides shade for the cab when parked in the sun, and keeps sun out of the driver’s eyes.
- Reinforced acrylic with a UV-resistant tint that resists scratches.
- Car-wash safe, with no drilling needed for installation.
Living with a smoke tint
A tinted deflector is designed to sit outside the glass, so the smoke shade mainly affects how the shield looks from the outside. Darker acrylic softens sun glare and cuts some direct light, which many drivers find useful on bright days.
Placement matters more than most people expect. Set each piece against the glass, check that it lines up with the window edge, then press it down evenly before the adhesive grips. Once set, the tape holds well, so repositioning later is difficult.
Owners of trucks used for towing or off-road trips often remove accessories before rough work. Adhesive-mounted shields should be taken off slowly, with heat if needed, to avoid tearing the paint or leaving residue.
- Test placement with the window closed first
- Check the tint in daylight and at dusk
- Clean adhesive residue with a plastic-safe remover
- Inspect the edges after heavy rain or a car wash
Specifications
| Brand | Auto Ventshade |
|---|---|
| Part number | AVS94806 |
| Finish | Dark Smoke |
| Set size | 4-piece set |
| Material | Tinted, reinforced acrylic |
| Mounting | Pre-applied 3M automotive-grade adhesive; no drilling |
| Fitment type | Direct fit |
| Warranty | Limited Lifetime Warranty |
| Made in | USA |
Vehicle fitment
It fits the 2019–2026 Ram 1500 in the Big Horn, HFE, Laramie, Laramie Longhorn, Limited, Limited Longhorn, Lone Star, Longhorn, Rebel, Special Service, TRX, TRX Launch Edition and Tradesman trims.
Earlier Ram 1500 model years and other Ram models are not on this list. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
With adhesive mounting there is no bracket to align, so placement is the main task. Position each deflector against the outside of the glass before pressing it on, because the adhesive grips once it is set.
What’s included
Four Dark Smoke Ventvisor side window deflectors in one 4-piece set, with pre-applied 3M automotive-grade adhesive.









