Select your vehicle
-13%

Auto Ventshade Aeroskin LightShield – 753096

Auto Ventshade

Shop Ford F-150 Hood Deflector on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Slickrock 4X4 is a participant in the Amazon Associates Program. As an Amazon Associate we earn from qualifying purchases.

  • Fits 2015–2020 Ford F-150 (King Ranch, Lariat, Limited, Platinum, Police Responder, SSV, XL, XLT)
  • Hood protector with five amber LED marker lights on the hood edge
  • Powered through the parking light wire connection, included
  • Black finish, TPO construction, mounting hardware included

Description

Overview

The Auto Ventshade Aeroskin LightShield Hood Protector, part number 753096, is a black hood shield with a built-in amber LED marker light bar for the 2015–2020 Ford F-150. The light bar has five LED marker lights along the hood edge.

The lights are powered by connecting into the vehicle’s parking lights, which the brand describes as a seamless integration. The shield itself is a low-profile Aeroskin design built from thermoplastic olefin (TPO), and it flush-mounts to the hood with double-sided 3M tape without drilling.

The shield provides hood, fender and windshield protection in a distinctive design.

Key features

  • Five amber LED marker lights along the hood edge
  • Lights connect into the vehicle’s parking lights through a wire connection
  • Low-profile, aerodynamic black appearance
  • Thermoplastic olefin (TPO) construction
  • Double-sided 3M tape mounting, no drilling required
  • Hood, fender and windshield protection

Maintaining a lighted hood shield

A hood shield takes the impact from stones, insects and road debris that would otherwise reach the paint on the hood, fenders and windshield. Over time the shield edges can lift, the adhesive can lose grip and the finish underneath can dull. Check the mounting edges every few months and after high-pressure car washes, and press any loose section back down.

A lighted marker bar adds a wiring question. Because the markers draw from the parking light circuit, a dim or flickering bar usually points to a loose connection or a parking light bulb that needs attention. Inspect the connector for corrosion and moisture before assuming the light bar has failed.

  • Check adhesive edges after washing
  • Inspect the wire connector for corrosion
  • Recheck the markers after replacing a parking bulb

Specifications

Brand Auto Ventshade
Part number 753096
Product type LightShield hood protector with LED marker lights
Lights Five amber LED marker lights
Power source Parking light circuit, via wire connection (included)
Material Thermoplastic olefin (TPO)
Color / finish Black
Mounting Double-sided 3M tape, no drilling
Fit type Direct fit
Included Mounting hardware, parking light wire connection

Installation notes

The light bar draws power through the vehicle’s parking light circuit using the included wire connection, so the markers operate with the parking lights. Check local rules on added lighting before driving with the lights on public roads.

What’s included

The kit includes the LightShield hood protector with its five amber LED marker lights, mounting hardware and a parking light wire connection.

Vehicle fitment

It fits the 2015–2020 Ford F-150 in the King Ranch, Lariat, Limited, Platinum, Police Responder, SSV, XL and XLT trims.

The 2009–2014 F-150 is a separate generation covered by the non-lighted Aeroskin (part AVS322001), and the 2021 and later F-150 are not in this list. Confirm your vehicle’s year, model and trim before ordering.

Fitment

VehicleYearsTrims
Ford F-1502015–2020King Ranch, Lariat, Limited, Platinum, Police Responder, SSV, XL, XLT

Use “Select your vehicle” at the top of the page to check this part against your vehicle.

Questions & Answers

Will the LightShield 753096 fit a 2017 Ford F-150?

Yes. A 2017 truck sits inside the 2015–2020 Ford F-150 range on the list. Confirm your trim, since the list names King Ranch, Lariat, Limited, Platinum, Police Responder, SSV, XL and XLT.

What powers the amber marker lights?

The five amber LED marker lights run off the parking light circuit, which they connect into through the included wire connection. The connection is a direct tie-in to the parking lights, so the markers operate with them.

Does it need drilling or special hardware?

No drilling is required, because the shield mounts with double-sided 3M tape. Mounting hardware is included with the kit, along with the parking light wire connection.

How should a hood shield be cleaned?

Rinse it with water and wash it with a mild car soap and a soft cloth. Avoid abrasive pads and strong solvents, which can dull the finish over time. Dry the adhesive edges so dirt does not build up under the mounting area.

Find it on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Shop Ford F-150 Hood Deflector on Amazon