Overview
The Auto Ventshade AVS192083 is a two-piece, smoke in-channel ventvisor for the front doors of the 1999–2011 Ford Ranger, the 1999–2007 Mazda B3000 and the 1999–2009 Mazda B4000. It installs in the window channel rather than on the exterior body.
Each vent is custom made and precision engineered to fit its vehicle, using tinted, reinforced acrylic that Auto Ventshade describes as UV and scratch resistant. The Ranger is listed with several trims, and the Mazda B3000 and B4000 are listed with Base, DS, SE and Troy Lee trims.
Key features
- Two-piece set for the front door windows of the listed trucks
- Vents fresh air into the cab and helps keep rain out
- Helps reduce interior wind noise and mirror fogging
- Helps cool the cabin when the vehicle is parked in the sun
- Car-wash safe, with no drilling and no special hardware
Care and window channel fit
An in-channel ventvisor depends on a clean, sound window channel. The rubber and felt liners that guide the glass can collect dust, grit and old adhesive over the years, and any residue will stop the tape from holding. Before fitting, run the window up and down to check that the glass moves smoothly, then clean the channel with a mild cleaner and let it dry fully. A channel that binds or sticks can also make the window hard to operate once the vent is in place.
Acrylic deflectors tolerate normal use well, but the edge can scratch from brushes and grit. Wash with plain soap and water, and avoid harsh solvents near the tape line. When the window is wound down, check that the vent still sits flat in the channel and has not shifted. If the tape lets go or the edge cracks, remove and replace the piece rather than forcing it back into position.
- Run the window through a full cycle before fitting
- Clean the channel and let it dry completely
- Check the vent sits flat after each season
- Replace cracked or lifted pieces
Specifications
| Brand | Auto Ventshade |
|---|---|
| Part number | AVS192083 |
| Pieces | 2-piece set |
| Finish | Smoke |
| Position | Front |
| Material | Tinted, reinforced acrylic |
| Warranty | Limited Lifetime Warranty |
| Origin | Made in the USA, per the manufacturer |
| Fitment type | Direct fit |
Vehicle fitment
It fits the 1999–2011 Ford Ranger (Edge, FX4, STX, Sport, Tremor, XL, XLT), the 1999–2007 Mazda B3000 (Base, DS, SE, Troy Lee) and the 1999–2009 Mazda B4000 (Base, DS, SE, Troy Lee).
Ford Ranger years after 2011 and Mazda years outside the listed ranges are not in the list. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Clean the window channel thoroughly before fitting so the automotive grade tape can bond.
What’s included
The set has two pieces.
Not included: Automotive grade tape is used for installation. Check the package contents against your installation before starting to confirm whether tape is included.









