Overview
The Auto Ventshade 894038 is a smoke Low Profile Ventvisor, a 4 piece side window deflector set for the 2005-2015 Toyota Tacoma Access Cab models. The visors are made of tinted, reinforced acrylic that is UV and scratch-resistant.
The visors reduce interior wind noise and mirror fogging. They mount on the outside of the window with pre-applied 3M automotive-grade adhesive and need no special hardware or drilling. They are made in the USA and carry a Limited Lifetime Warranty.
The kit is safe for car washes and installs in minutes. It is a direct fit.
Side window deflectors, sometimes called vent visors, are mounted above the door glass so the window can be opened a little in rain without letting water in. Auto Ventshade says its design reduces interior wind noise and mirror fogging, and that the visors suit car washes.
Key features
- Smoke low profile side window deflectors
- 4 piece set
- Tinted, reinforced acrylic; UV and scratch-resistant
- Pre-applied 3M automotive-grade adhesive
- No drilling or special hardware required
- Limited Lifetime Warranty, made in the USA.
Living with side window visors
Side window visors let a window stay cracked in rain without letting water in, which is useful on warm days and after washing. Their low profile sits close to the door frame, so they are less noticeable than taller deflectors. Because they mount to the outside of the glass, keep the adhesive edges clean and check them after strong weather or high-pressure washing to make sure they remain fully bonded.
Acrylic visors can pick up light scratches from brushes and grit, so wipe them with a soft cloth and mild soap instead of abrasive cleaners. Before removing a visor, warm the adhesive and lift slowly to avoid cracking the acrylic or marking the paint around the door frame.
- Wipe with mild soap and a soft cloth
- Check the edges after strong weather
- Avoid abrasive cleaners
- Warm the adhesive before removal
Specifications
| Brand | Auto Ventshade |
|---|---|
| Part number | 894038 |
| Part type | Low Profile Ventvisor (side window deflector) |
| Color | Smoke |
| Pieces | 4 piece set |
| Material | Tinted, reinforced acrylic |
| Mounting | Pre-applied 3M automotive-grade adhesive |
| Cab style | Access cab models |
| Warranty | Limited Lifetime Warranty (per Auto Ventshade) |
| Fit type | Direct fit |
| Distributor part number | AVS894038 |
Vehicle fitment
The manufacturer fitment list for the Auto Ventshade 894038 includes:
- 2005–2015 Toyota Tacoma (Base, Pre Runner, TRD Pro, X-Runner)
The fit covers Access Cab models, so confirm the cab style on your truck before use if you own a different Tacoma cab.
The fit covers the 2005 to 2015 Toyota Tacoma Access Cab. Later Tacoma generations and other cab styles are not covered. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Wash and dry the door frame edges first. Press each visor into place on its pre-applied adhesive, following the included instructions.
Leave the adhesive to cure before using a car wash, and check the visors are tight after the first few days.
What’s included
4 piece set of Low Profile Ventvisors with pre-applied adhesive.










