Overview
The ARB OMESB57 provides polyurethane spring bushings for leaf springs, intended for owners whose original bushings are worn beyond reuse. Fitment is limited to the words Universal Fit, with no year, model or trim named.
Verify the bushing fit against your spring hardware, and keep the old bushings until the new set is confirmed.
Key features
- Polyurethane spring bushing construction
- Aimed at replacing bushings that have worn out
- Universal Fit wording with no vehicle list
- Part number OMESB57 from ARB 4×4 Accessories
Measuring for a good match
A bushing that is nearly right can still cause binding, noise or early wear, so measuring the old set comes first. Note the outside diameter of the bushing, the inside diameter of the spring eye, and the sleeve length. Compare those figures against what the new kit is meant to replace, using a caliper rather than estimates.
Worn bushings often leave clues: shiny or cracked material, wallowing movement at the eye, and a spring that has started to rotate. Those signs point to the spring or mount needing attention as well. Clean the spring eye and check its condition before pressing in the new bushing. A careful dry fit helps show whether the bushing will seat evenly.
- Record the old bushing dimensions before removal
- Look for rotation in the spring eye
- Dry fit the bushing before final pressing
Specifications
| Brand | ARB 4×4 Accessories |
|---|---|
| Part number | OMESB57 |
| UPC | 881348005304 |
| Material | Polyurethane |
| Type | Spring bushing kit |
Vehicle fitment
Vehicle coverage is unknown for the OMESB57. Universal Fit is the only fitment, so measure your leaf spring setup and confirm the bushings match before installing.
Confirm your vehicle’s year, model and trim before ordering.
What’s included
The pieces in the kit and any included hardware are unknown. Compare the contents against the parts you removed before starting the installation.




