Overview
The ARB Spring Bushing Kit, model OMESB106, is a set of polyurethane leaf spring bushings from ARB 4×4 Accessories for the rear position. It is intended to replace worn bushings and is universal fit.
Before you replace bushings
Leaf spring bushings sit where the spring eye meets the mounting bracket. Over time the rubber or polyurethane wears, which lets the spring move more than intended and can make the axle feel loose. Worn bushings are often replaced in pairs or as a full set, since the remaining old bushings usually wear at a similar rate.
Because the spring must come off the axle for this work, plan time and tools before starting. Support the axle safely, mark the spring position for reassembly, and inspect the spring eyes and hardware for wear. New bushings should seat squarely and move freely during assembly. Tighten fasteners to the vehicle’s specification once the spring is back in place.
- Inspect spring eyes and shackle hardware
- Mark spring position before removal
- Replace bushings as a matched set
- Check for axle movement after reassembly
Specifications
| Brand | ARB 4×4 Accessories |
|---|---|
| Model code | OMESB106 |
| UPC | 9332018021410 |
| Material | Polyurethane |
| Position | Rear |
Vehicle fitment
This kit is universal fit, but leaf spring bushings depend on the specific spring. Confirm the leaf spring it suits against your own spring before ordering.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Replacing leaf spring bushings generally means removing the spring from the axle, so plan that work before you start on the old bushings.
What’s included
The kit consists of polyurethane bushings for the rear leaf spring position.



