Overview
The ARB ARB715LB is a 29 ft. x 4.3 in. snatch strap from ARB 4×4 Accessories, a recovery strap for freeing a bogged or immobilized 4WD with a second vehicle positioned to pull.
Elastic stretch under load stores energy that adds to the pull and can help limit stress on the vehicles involved. Recovery gear of this kind is universal fit, so no particular make, model or year applies.
Key features
- Elastic stretch under load adds energy to the recovery
- Stated to reduce the likelihood of vehicle damage
- Designed for use with a second vehicle
- Size of 29 ft. x 4.3 in.
Matching the strap to the job
A wider strap suits recoveries where the stuck vehicle is heavy or the ground is soft enough to need steady, broad load. Length is the other choice that counts: a longer strap keeps the rescue vehicle farther back from the stuck one, which keeps the pulling area clear of debris.
Hardware decides how well any strap performs. Use recovery-rated shackles with a matching load limit, and inspect D-rings and mounting points before each trip. A strap is only as strong as its weakest attachment, so a worn shackle pin should be replaced rather than tolerated.
- Wipe grit from the loops before rolling the strap
- Stow the strap clear of sharp edges
- Replace any strap that has been cut or heavily worn
Specifications
| Brand | ARB 4×4 Accessories |
|---|---|
| Part number | ARBARB715LB |
| UPC | 9332018041753 |
| Type | Snatch strap |
| Dimensions | 29 ft. x 4.3 in. |
Vehicle fitment
Fitment is universal. The strap is recovery equipment rather than a vehicle part, so it is not matched to a model year, make or trim.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Position the second vehicle so it can pull in a straight line, and keep the area around the strap clear while it is under tension.
What’s included
Inspect the strap and any hardware you pair with it before the recovery.








