Overview
The ARB 3500520 is an Intensity driving LED wiring loom with Deutsch DT-06 waterproof connectors for ARB Intensity LED driving lights.
A wiring loom connects auxiliary lights to the vehicle’s power with a switch and harness. ARB developed the 3500520 for its new Intensity LED driving lights, and it is based on the 3500440 Auxiliary Lighting Loom.
The loom uses the same mouse style switch and harness as the 3500440 loom, with Deutsch DT-06 connectors in place of the bullet type connectors used on ARB fog lights and IPF lights. It is universal fit.
Key features
- Wiring loom for ARB Intensity LED driving lights
- Deutsch DT-06 waterproof connectors
- Same mouse style switch and harness as the 3500440 Auxiliary Lighting Loom
- Replaces the bullet type connectors used for ARB fog lights and IPF lights
Wiring a driving light loom
A driving light loom sets up the switch, relay and harness that feed the lights, so the layout matters as much as the lights themselves. Mount the switch where it can be reached while driving, and route the harness away from exhaust heat, moving suspension parts and sharp edges. Keep the battery disconnected while the connections are made.
Deutsch connectors are sealed against water and dust, but they still need correct assembly and a clean mating surface. Check each pin and seal before the connector is pushed together, and apply dielectric grease where the connector style calls for it. Inspect the loom after water crossings and heavy trail use for chafed insulation or loose pins.
- Protect every circuit with the correct fuse
- Use a relay for high current lights
- Check connector seals after water crossings
Specifications
| Brand | ARB 4×4 Accessories |
|---|---|
| Part number | 3500520 |
| UPC | 9332018017895 |
| Product type | Auxiliary lighting wiring loom |
| Designed for | ARB Intensity LED driving lights |
| Connectors | Deutsch DT-06 waterproof |
| Switch | Mouse style |
| Based on | 3500440 Auxiliary Lighting Loom |
| Fitment type | Universal fit |
Vehicle fitment
The 3500520 is a wiring loom for ARB Intensity LED driving lights. It is universal fit and is not built for a specific vehicle.
Connector style matters: the loom uses Deutsch DT-06 connectors, not the bullet type connectors used on ARB fog lights and IPF lights. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
- Route and secure wiring away from heat, moving parts and sharp edges. Follow the wiring steps for your lighting setup.
- Fuse or protect electrical circuits as the manufacturer directs, and disconnect the battery before connecting wiring.
- Check local regulations on auxiliary lighting before use on public roads.
What’s included
Not included: The ARB Intensity LED driving lights are not included.









