Overview
The Gorilla Automotive Acorn Bulge lug nut is a heat treated lug nut with a 3/4 inch hex and a 12mm x 1.50 thread size. The UPC is 12619300846. Compare its acorn bulge style and thread size with the lug nut already on your wheel before ordering.
Choosing a replacement lug nut
Lug nut style has to match the seat in the wheel as well as the stud. Acorn bulge nuts have a conical, bulged shape that seats in a matching wheel opening, and a mismatched seat can loosen under driving loads. Thread size and pitch also need to match the studs exactly, since an off-pitch nut can cross-thread and damage both parts. Before ordering, compare the nut you are replacing with the new one by looking at its seat, its hex size and its markings.
Heat treated nuts are used where a stronger fastener is wanted, but hardness does not replace correct seating or torque. Tighten in a star pattern with a torque wrench set to your vehicle’s specification, and recheck after the first few drives. Look for cracked nut bodies, rounded hex corners, or damaged seats on removal, and replace any nut that shows them. Keep a few spare nuts of the same style in the vehicle if you run aftermarket wheels.
Specifications
| Brand | Gorilla Automotive |
|---|---|
| UPC | 12619300846 |
| Style | Acorn bulge |
| Treatment | Heat treated |
| Hex size | 3/4 inch |
| Thread size | 12mm x 1.50 |
Vehicle fitment
No vehicle is named for this lug nut. Compare its acorn bulge style and 12mm x 1.50 thread size with the lug nut already on your wheel.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Match the style and thread size of your current lug nut before choosing this one.









