Overview
The Gorilla Automotive 41198XLHT is an extra long acorn bulge lug nut, heat treated, with a 9/16 thread, a 3/4-inch hex and a 1.9-inch length. Acorn bulge nuts use a cone-shaped seat, so the seat style has to match your wheel.
Check the thread size and seat style first, since no vehicle is named for this part number.
Key features
- Extra long 1.9-inch length
- Heat treated
- Acorn bulge seat style
- 3/4-inch hex and 9/16 thread
Matching the seat and thread
An acorn bulge nut relies on a cone-shaped seat that has to sit in a matching wheel bore. Before installing, look at the seat on the nut you are removing and the bore in the wheel, then confirm both are acorn style. A mismatch can leave the nut bearing on only a small edge, which loosens over time. Thread matters too: a 9/16 thread will not tighten properly into a wheel tapped for a different size.
Extra length helps on wheels with deep or thick hub faces, but a longer nut only works when it still seats fully and the threads engage evenly. Start each nut by hand, then tighten in a star pattern. Inspect nuts and studs periodically for cracked seats, stripped threads or rust, and replace any damaged nut.
- Compare seat style before buying
- Check thread pitch on the stud
- Replace nuts that show seat damage
Specifications
| Brand | Gorilla Automotive |
|---|---|
| Part number | 41198XLHT |
| UPC | 70000668394 |
| Seat style | Acorn bulge |
| Length | 1.9 inch |
| Hex size | 3/4 inch |
| Thread size | 9/16 |
| Treatment | Heat treated |
Vehicle fitment
This nut is not tied to a particular vehicle. Match the 9/16 thread and acorn bulge seat to your wheels before ordering.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
An acorn bulge nut only seats correctly in a wheel built for that seat, so compare the seat before installing.
What’s included
The package includes the 41198XLHT lug nut. Check the package contents against your installation before starting.









