Overview
The Crown Automotive 9 inch electric wiper blade, part number WSHB1, is a rear blade made for wiper motor WSH12 or WSH6. Its position is rear, and it is a direct-fit replacement for the Willys vehicles covered by its fitment.
The UPC for WSHB1 is 848399074758. Because the blade is electric, match it to a compatible wiper motor before fitting.
Key features
- 9 inch electric blade design
- Made for wiper motor WSH12 or WSH6
- Rear position listed
- Direct fit for listed Willys models
Matching motor and blade
Electric wiper blades depend on the motor and its linkage working together, so the blade is only one part of the system. A blade can look fine while the motor’s drive arm has play or the mounting bracket has loosened, which causes uneven sweep and hard starting. Inspect the drive arm and mounting before replacing the blade.
Many older vehicles have blades that do not match the motor’s sweep angle, so the blade length and arm pivot should be checked against the existing setup. Clean the glass and the rubber before fitting, and keep the wiper switch in the off position while working near the motor.
- Check the motor drive arm for play
- Confirm the motor model before buying
- Tighten mounting hardware after the first run
- Keep the rubber clean to limit drag
Specifications
| Brand | Crown Automotive |
|---|---|
| Part number | WSHB1 |
| UPC | 848399074758 |
| Blade size | 9 inch |
| Blade type | Electric |
| Compatible wiper motor | WSH12 or WSH6 |
| Position | Rear |
Vehicle fitment
It fits 1946–1949 Jeep Willys CJ-2, 1949–1952 and 1954–1958 Jeep Willys CJ-3, 1955–1958 Willys CJ-5, 1956–1958 Willys CJ-6, and 1941–1942 Willys MB.
Later CJ5 and CJ6 years from 1959 are not on this list. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Confirm the wiper motor is WSH12 or WSH6 before fitting the electric blade.
What’s included
The 9 inch electric wiper blade, part WSHB1.
Not included: the wiper motor, which must be sourced separately for the WSH12 or WSH6 setup.







