Overview
The Warn Wireless Winch Control System, part number 90287, lets you operate a WARN truck or SUV winch remotely from up to 50 feet away. It takes the place of the corded remote with a wireless transmitter and receiver.
The receiver plugs in where the corded remote normally attaches, so no wiring is needed. The system works with a winch that has a five-wire control pack, so compatibility depends on the winch rather than the vehicle.
Key features
- Operates the winch from up to 50 feet away
- Plug-and-play connection where the corded remote attaches, with no wiring
- Weatherproof transmitter with two large buttons for use while wearing gloves
- Two-color LED gives operator feedback
- Sealed for protection against the elements
- Activation sequence guards against accidental power-ups
Using a wireless winch remote safely
A wireless remote lets you stand clear of the winch line while it runs, which is the main reason to use one. Keep your position to the side of the cable and away from the fairlead, since a cable under load can snap or whip. Before a pull, confirm the winch area is clear and that everyone nearby knows the winch is about to run.
Good habits extend the life of the transmitter and receiver. Keep the transmitter in its holster when not in use, and store it out of direct heat. Check the buttons and indicator light after wet or muddy trips, and clean any debris from the battery area. A remote that responds slowly or inconsistently is worth checking before the next recovery.
- Stand clear of the cable and fairlead
- Keep the transmitter in its holster when idle
- Check buttons and indicator after wet trips
Specifications
| Brand | Warn |
|---|---|
| Part number | 90287 |
| UPC | 12748902874 |
| Type | Wireless winch remote control system |
| Winch type | Electric |
| Range | Up to 50 feet |
| Compatibility | WARN truck and SUV winches with a five-wire control pack |
| Transmitter | Weatherproof, two large buttons |
| Indicator | Two-color LED |
| Kit contents | Wireless transmitter, receiver, holster, lanyard, mounting hardware |
Vehicle fitment
This system is universal fit and is not tied to a specific year, make or model. It works with any five-wire WARN truck or SUV winch, so check your winch’s control pack before installing.
Compatibility depends on the five-wire control pack, not the vehicle.
Installation notes
Plug the receiver into the winch’s five-wire control connection where the corded remote would normally attach. Keep the transmitter in its holster on the lanyard when not in use, and keep hands away from the fairlead and cable while the winch is running.
What’s included
The kit includes a wireless transmitter, a receiver, a holster, a lanyard and mounting hardware.
Not included: the winch itself, which must have a five-wire control pack.









