Overview
The Warn Trans4mer 76253 is a black powder-coated steel grille guard from the WARN Trans4mer Mounting System, supplied with two uprights and two crossbars. It bolts directly to the vehicle frame.
The 76253 is a direct-fit Trans4mer grille guard, and fit should be confirmed for your vehicle before ordering. It will not retain the factory tow hooks and excludes trucks with the SPORT package. It is the required base for the system’s brush guards, winch carrier, front receiver and light options.
Key features
- Trans4mer grille guard with two uprights and two crossbars
- Bolts directly to the vehicle frame
- Black powder coat finish on steel
- Will not retain the factory tow hooks
- Excludes the SPORT package
- Base for other Trans4mer options
Recovery without the tow hooks
Factory tow hooks give a front recovery point that many owners rely on, so removing them changes how a truck is pulled out of mud or sand. With this guard in place, plan a replacement attachment point, such as a frame-mounted recovery point or a receiver-based option, before you need it.
Recovery straps and shackles should be rated for the load and matched to the anchor. Use a strap rated for the vehicle’s weight and keep the angle of pull as straight as possible to limit stress on the frame mounts and the guard uprights.
Check the frame bolts and the guard after any hard recovery. Look for bent uprights, cracked powder coat at the crossbars and loose fasteners. Re-torque bolts after the first few drives on rough roads, and recheck them at every service interval.
- Plan a replacement recovery point before you need it
- Match strap and shackle ratings to the load
- Recheck frame bolts after hard recoveries
Specifications
| Brand | Warn |
|---|---|
| Part number | 76253 |
| UPC | 1274876253 |
| Product type | Grille guard, Trans4mer Mounting System |
| Material | Steel |
| Finish | Black powder coat |
| Fit type | Direct fit |
| Weld-on | No, bolt-on to the frame |
| Components | Two uprights and two crossbars |
| Factory tow hooks | Not retained |
| Package exclusion | SPORT package |
Vehicle fitment
The 76253 is a direct-fit Trans4mer grille guard that bolts to the frame. Confirm fit for your truck’s year, model and trim before ordering, and confirm the truck is not equipped with the SPORT package.
Check the part number against WARN’s application guide for your truck, and note that the SPORT package is excluded. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The grille guard replaces the factory tow hooks rather than keeping them, so plan for another recovery point if you rely on the hooks. It bolts to the frame without welding.
A portable winch mounts to the Class III Front Receiver, which replaces the fixed carrier. A fixed winch mounts to the Winch Carrier, which can be covered by the stainless steel SST cover. Light mounting uses a light bar with two mounting tabs or L brackets for side mounting.
What’s included
Two uprights and two crossbars.
Not included: Brush guards, winch carrier, front receiver and light mounting parts are separate Trans4mer options.









