Overview
The Warn Medium Duty Winching Accessory Kit, part number 62858, is a recovery kit for winch use that combines a tree trunk protector, two clevis D-shackles, a snatch block, a recovery strap, a camo soft case and WARN gloves. Warn designs the kit for winch capacities to 9.5ti with 5/16 in (11mm) wire rope.
The kit is universal fit, so it is not built around a single vehicle model. Each component carries its own rating.
Key features
- Designed for winch capacities to 9.5ti
- Snatch block rated at 19,000lbs/8618kgs capacity, with grease port
- Recovery strap rated to 21,600lbs/9797kgs
- Tree trunk protector rated to 30,000lbs breaking strength
- Camo Cordura nylon soft case for storage
Rigging within ratings
The strength of a rig is set by its weakest component, so the kit should be used as one system with the winch and rope. The snatch block changes the direction and multiplies the pull, which can increase the load on the strap and rope. Keep each piece within its stated rating and avoid mixing in mismatched shackles or hooks that could bend under load.
Inspect the wire rope for kinks, broken strands and flattened sections before each pull, and check the snatch block sheave for smooth rotation. Store the soft case in a dry place so the Cordura and the strap stay clean. Replace any component that shows deformation, cuts or heat damage.
- Use the snatch block only within its rating
- Check the rope for kinks and broken strands
- Keep the soft case dry between uses
Specifications
| Brand | Warn |
|---|---|
| Part number | 62858 |
| UPC | 1274862858 |
| Winch capacity | To 9.5ti |
| Wire rope size | 5/16 in (11mm) |
| Tree trunk protector | 4 in x 8 ft (10cm x 2.4m), rated to 30,000lbs breaking strength |
| Clevis/D-shackles | 2 pieces, 3/4 in (20mm) pin diameter |
| Snatch block | 19,000lbs/8618kgs capacity, grease port |
| Recovery strap | 3 in x 30 ft (8cm x 9m), rated to 21,600lbs/9797kgs |
| Case | Camo Cordura nylon soft case |
Vehicle fitment
The kit is not vehicle-specific. Warn lists universal fit, and the key fit points are the winch capacity and wire rope size rather than a vehicle model.
Match the 9.5ti winch capacity and 5/16 in (11mm) rope size to your equipment before use.
Installation notes
The D-shackles, snatch block and recovery strap are rigging hardware. Keep every component within its stated rating and never load the kit beyond the lowest rated part in the rig.
What’s included
- 4 in x 8 ft tree trunk protector
- 2 clevis/D-shackles, 3/4 in (20mm) pin diameter
- 19,000lbs/8618kgs capacity snatch block with grease port
- 3 in x 30 ft standard recovery strap
- Camo Cordura nylon soft case
- WARN gloves
Not included: the winch and wire rope the kit is designed for.









