Overview
The Warn Foot Down Winch Mounting Kit, part number 13942, is a steel mounting plate kit with a black powder coated finish for flat-surface winch mounting. It is universal fit, so it is not built around one vehicle model.
Each kit contains a plate, a solenoid bracket and hardware. The plate is also a foot forward winch mount, with pre-drilled patterns for two groups of winch models.
Key features
- Black powder coated steel construction
- Mounts to any appropriate flat surface
- Includes winch mounting plate, solenoid bracket and hardware
- Pre-drilled for several Warn winch models, listed in the specifications
- Universal fit
Choosing a flat-surface spot
Flat-surface mounts depend on the surface, so the choice of location matters as much as the plate itself. Look for solid, reinforced material with no gaps, and make sure the plate can sit flat without bowing. Leave room for the winch body, fairlead and cable path, and keep the solenoid where it can drain and stay out of splash zones.
The pre-drilled patterns are a useful guide, but the winch model should always be checked first. After installation, look over the plate, bolts and nuts after the first few uses and after any hard pull. Watch for cracks in the steel, rust at the bolt holes, and a solenoid bracket that has shifted, then tighten or replace parts.
- Find solid, flat backing before marking holes
- Leave room for the winch and cable path
- Keep the solenoid out of splash zones
- Inspect bolt holes for rust after use
Specifications
| Brand | Warn |
|---|---|
| Part number | 13942 |
| UPC | 12748139423 |
| Material | Black powder coated steel |
| Style | Universal |
| Fitment | Universal fit |
| Included | Winch mounting plate, solenoid mounting bracket, nuts and bolts kit |
| Pre-drilled for | 9.5si, 9.5ti, 9.5xp, XD9i, XD9, M8, M6 and T9K |
| Also pre-drilled for | M12, 9.5xp, XD9, M8274, M8, M6 and T9K |
Vehicle fitment
The kit is a winch mount rather than a vehicle-specific part, so compatibility depends on your winch model.
Confirm your vehicle’s year, model and trim before ordering, and match your winch model to the plate patterns.
Installation notes
The plate is pre-drilled, so match your winch model to one of the listed patterns before mounting. Tighten the included hardware fully and inspect it regularly while the winch is in use.
What’s included
Each kit contains a winch mounting plate, a solenoid mounting bracket and a nuts and bolts kit.
Not included: the Warn winch.









