Overview
The Oro-Tek TPMS sensor is a factory style replacement tire pressure monitoring sensor for 2007 to 2012 Jeep Wrangler JK models, including Rubicon and Unlimited versions. It fits 2-door and 4-door models.
Use the sensor only for the years and models it fits: 2007 to 2012 Wrangler JK, Rubicon and Unlimited.
Tire pressure sensors and service
A TPMS sensor sits inside the wheel and reports tire pressure to the vehicle. Because the sensor is mounted to the rim and sealed to the valve, it is usually serviced when the tire is off the wheel. Sensor batteries are sealed in and have a finite life, so a sensor that has been in service for many years may fail on its own even if the tire is fine.
Replacing sensors during tire service is common, especially when they are the same age. Ask the installer to check the valve stem and sealing surfaces, and make sure the new sensor is set up for your vehicle before returning it to service. After installation, confirm the warning light clears on a drive and recheck the pressure of every tire.
- Check all tire pressures before troubleshooting
- Inspect valve stems and seals at service
- Confirm programming is complete after installation
- Note the sensor age when replacing
Specifications
| Brand | Oro-Tek |
|---|---|
| UPC | 108152100330 |
| Type | Tire pressure monitoring (TPMS) sensor |
| Style | Factory style replacement |
| Model years | 2007 to 2012 |
| Models | Wrangler JK, Rubicon and Unlimited |
| Body styles | 2-door and 4-door |
Vehicle fitment
It fits 2007 to 2012 Jeep Wrangler JK models, including Rubicon and Unlimited, in 2-door and 4-door body styles.
It covers 2007 to 2012 Wrangler JK models only. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Check whether the sensor needs programming or relearning after installation before you begin.
What’s included
This is a replacement sensor. Have valve hardware and a new seal ready before installing.









