Overview
The Tonno Pro Hard Fold HF-155, part number T/PHF-155, is a hard folding tonneau cover for the 2007–2013 Chevrolet Silverado 1500 and 2007–2013 GMC Sierra 1500. Rather than rolling, the cover folds forward on its frame, and nylon straps hold it in the open position when you need to haul cargo.
The Hard Fold is built on an all-aluminum underbody frame with marine grade vinyl on top. It is designed to be impact resistant, with a secure closure and straightforward operation. The vinyl top is designed to resist scuffing and denting, and the cover is built to handle snow, rain and hail. Its low profile suits most trucks.
Key features
- All-aluminum underbody frame covered with marine grade vinyl
- Opens by unclamping the EZ lock handles and folding the cover forward
- Nylon straps hold the cover open when hauling cargo
- Arrives completely assembled; no drilling required
- Impact resistant with a low profile look
- Limited lifetime warranty on the aluminum sub-frame.
- 10 year warranty on the vinyl.
- Installation time listed at less than 10 minutes
Hauling with a hard fold
A hard fold cover changes the way a bed is loaded. Because the panel folds forward on its frame rather than rolling, the open area sits over the cab, so long loads may need to be planned around the hinge line. Nylon straps keep the cover secured in the open position while you load, which helps when shifting cargo would otherwise catch the panel.
Over time, the seals and the clamp points carry most of the wear. Wipe the vinyl with a mild cleaner and keep the seal edges free of grit, since trapped debris can scratch the surface when the cover closes. Check the EZ lock handles periodically to make sure they still pull firmly and hold the panel tight against the rail.
- Check the nylon straps for fraying before heavy loads
- Keep seal edges clear of grit
- Test the EZ lock handles after rough roads
Specifications
| Brand | Tonno Pro |
|---|---|
| Part number | T/PHF-155 |
| Model number | HF-155 |
| Tonneau type | Hard fold |
| Frame | All-aluminum underbody |
| Top material | Marine grade vinyl |
| Fitment type | Direct fit |
| Assembly | Completely assembled |
| Drilling | Not required |
| Installation time | Less than 10 minutes |
| Warranty | Limited lifetime on aluminum sub-frame; 10 year on vinyl |
Vehicle fitment
It is a direct fit for the 2007–2013 Chevrolet Silverado 1500 in the Hybrid, LS, LT, LTZ, WT and XFE trims, and for the 2007–2013 GMC Sierra 1500 in the Denali, Hybrid, SL, SLE, SLT, WT and XFE trims.
Silverado and Sierra 2500 HD or 3500 models are not on this list, and other Chevrolet and GMC model years outside 2007–2013 are not covered. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The cover arrives assembled and requires no drilling. Installation takes less than 10 minutes. Keep hands clear of the hinges and clamps when opening or closing the cover.
What’s included
The cover comes completely assembled with EZ lock handles and nylon straps for holding the cover open.

















