Overview
The TeraFlex 1951350 is a small FlexArm joint field rebuild tool, a hand tool for rebuilding small FlexArm joints away from the shop. It is not a vehicle part, and the manufacturer marks it universal fit.
The tool is designed to work with two open end wrenches or sockets, so a joint can be serviced with common hand tools. TeraFlex also recommends a bench vise, which it says is extremely helpful during FlexArm joint rebuilds.
Key features
- Built for small FlexArm joints
- Works with two open end wrenches or sockets
- Bench vise use recommended for rebuilds
- Designed for field rebuilding of joints
Working on FlexArm joints
FlexArm joints carry the articulation load between a link and its mount, and over time the internal parts wear, bind or develop play. Rebuilding one away from the shop can save a trip when a joint fails on the trail, but it still needs a clean workspace and a steady hand. Wipe off dirt and grit before opening the joint, since debris pressed into the bore can shorten the next service interval.
Good technique matters more than force. Secure the arm in a vise where possible, work the joint slowly with the wrenches, and stop if parts resist rather than forcing them. Keep track of small components in order so reassembly is correct. Before going back on the trail, check that the joint moves freely through its travel with no binding or looseness, and recheck it after the first few runs.
- Inspect the joint for play or rough movement before disassembly
- Keep rebuilt parts in order on a clean cloth
- Replace worn components rather than reusing damaged ones
Specifications
| Brand | TeraFlex |
|---|---|
| Part number | 1951350 |
| UPC | 843885024736 |
| Tool type | Small FlexArm joint field rebuild tool |
| Drive or wrench type | Two open end wrenches or sockets |
| Fitment | Universal fit |
Vehicle fitment
This is a hand tool rather than a vehicle-specific part, so it is not matched to a year, make or model. It is a universal fit tool.
It is intended for small FlexArm joints and is not meant for large joints. Confirm fit for your vehicle’s year, model and trim before ordering.
Installation notes
Work the joint with two open end wrenches or sockets, and clamp it in a bench vise where possible. Wear eye protection when pressing parts out of a joint.
What’s included
Check the package contents against your installation before starting the rebuild.




