Overview
The T-Rex Grilles Torch-AL Series LED Grille, part number 6315481, is a main replacement grille with a built-in 30-inch curved dual row LED light bar for the 2017-2018 Ford F-250 Super Duty and F-350 Super Duty. It installs as a direct fit with no cutting and no drilling.
The Torch line uses LED lighting components from ZROADZ, mounted behind heavy duty formed mesh and surrounded by X-Metal studs. The brand says each stud carries X-Metal branding and every grille carries the X-Metal Grille logo. This Torch-AL version is all aluminum, TIG welded, with laser cut mesh and a black finish with black mesh.
Key features
- One 30-inch curved dual row LED light bar
- All aluminum TIG welded construction
- Laser cut mesh in black
- Wiring harness included
- No cutting, no drilling installation, per the brand
- Made in the USA
- Lifetime structural warranty and 3-year finish warranty.
Lighting and wiring basics
An LED light bar built into a grille adds weight and heat near the front of the truck, so the wiring path matters. Route the harness away from moving parts, hot areas and sharp edges, and keep connectors sealed from road spray. A fused circuit protects the truck’s electrical system if a wire is pinched or damaged during installation.
Aiming matters too. After installation, check that the light bar sits level and that the beam does not blind oncoming drivers. Inspect the lens and mounts after rough trail use, and keep the LED face clean so it stays bright.
- Route wiring away from heat and moving parts
- Use a fused circuit for the light bar
- Check the beam level after installation
- Keep the lens clean and seals intact
Specifications
| Brand | T-Rex Grilles |
|---|---|
| Part number | 6315481 (T/R6315481) |
| UPC | 609579033091 |
| Series | Torch-AL Series LED Grille |
| Lighting | One 30-inch curved dual row LED light bar |
| Construction | All aluminum, TIG welded |
| Mesh | Laser cut, black |
| Finish | Black with black mesh |
| Wiring | Harness included |
| Warranty | Lifetime structural; 3-year finish, per the brand |
| Fitment type | Direct fit |
Vehicle fitment
Listed fitment covers the 2017-2018 Ford F-250 Super Duty and F-350 Super Duty in King Ranch, Lariat, Limited, Platinum, XL and XLT trims.
Close vehicles not covered include the Ford F-150 and Super Duty model years outside 2017-2018. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
No cutting or drilling is needed to install this grille. Route the LED wiring through a fused circuit, and check local rules before using the light bar on public roads.
What’s included
The main replacement grille with its LED light bar and a wiring harness.
Not included: Bumper grilles, light brackets and separate lights are separate parts and are not included.














