Overview
The SSV Works Polaris RZR XP 1000 Complete 5 Speaker Plug-And-Play System, part number RZ3-5A, is a complete side-by-side audio kit. It comes with pre-installed speakers, pre-tuned amplifiers and a vehicle-specific plug-and-play wiring harness.
Everything comes in one box, and the kit is designed to be fitted without soldering, cutting or crimping. Each kit is pre-loaded with SSV Works speakers, subwoofers and an amplifier.
Key features
- Five speakers in one complete kit
- Pre-loaded speakers, subwoofers and amplifier
- Pre-tuned amplifiers
- Vehicle-specific plug-and-play harness
- No soldering, cutting or crimping required
Keeping a side-by-side audio kit working
A plug-and-play audio kit depends on the harness fitting cleanly into the vehicle’s existing connections. Before installing, confirm the speaker positions and the amplifier mounting location, and check that the wiring is not pinched or rubbing against frame edges. A harness meant for one model may look similar on another, so compare connectors and wire colors before plugging anything in.
Speakers and amplifiers in off-road machines face dust, water and vibration. Check the connections and mounting hardware periodically, especially after rough trail runs, and tighten any loose fasteners. Keep the amplifier vented so it does not overheat, and watch for crackling, dropouts or hum, which can point to a loose connector or a worn speaker. Clean connectors that show corrosion, and store spare fuses or small parts in a dry place.
Specifications
| Brand | SSV Works |
|---|---|
| Part number | RZ3-5A |
| Speakers | 5 |
| Components | Speakers, subwoofers and amplifier |
| Wiring | Vehicle-specific plug-and-play harness |
| Named vehicle | Polaris RZR XP 1000 |
Vehicle fitment
The kit is built for the Polaris RZR XP 1000 and uses a vehicle-specific harness. Check the year, model and trim of your side-by-side against the kit before installing, since a different model may not match.
Confirm your vehicle’s year, model and trim before ordering. Because the harness is vehicle specific, a different side-by-side model may not match this kit.
Installation notes
Installation is bolt-in, using the included harness, with no soldering, cutting or crimping needed.
What’s included
Pre-installed speakers, subwoofers, pre-tuned amplifiers and the vehicle-specific plug-and-play wiring harness.









