Overview
The Smittybilt DS2-8 is a vehicle-specific mounting kit that attaches a Smittybilt Defender roof rack to a vehicle’s factory roof rack rails without drilling.
The hardware is designed for this one job, so the rack mounts to the factory rails rather than to new holes in the roof.
Key features
- Vehicle-specific hardware kit
- Attaches to factory roof rack rails
- No drilling or modification
- Designed for the Smittybilt Defender roof rack
Checking factory rack rails
Factory roof rails vary in shape and mounting points, and a rack that clamps to one style may not clamp to another. Look at the rails from the side and note how they are shaped and where the rack’s feet will sit. Clean the rails before fitting the mounting hardware so the clamps grip evenly and do not slide. Rails that bend or corrode should be replaced before they carry any load.
Roof loads raise the center of gravity, so keep heavy gear low and centered on the rack and secure everything before driving. Check the rack and its mounts after the first few miles on rough roads, and re-tighten any fastener that has loosened. Wind noise and rattles often point to a mount that needs adjustment.
- Clean the rails before mounting
- Keep heavy items low on the rack
- Re-tighten clamps after the first drive
Specifications
| Brand | Smittybilt |
|---|---|
| Part number | DS2-8 |
| UPC | 631410114898 |
| Application | Defender roof rack mount |
| Mounting | Factory roof rack rails |
| Drilling | Not required |
Vehicle fitment
Match your vehicle’s year, model and trim to the rack rails before ordering.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The kit uses factory rack rails, so check that your vehicle has them before ordering, and confirm the rack’s mounting points line up with the kit.
What’s included
The mounting hardware kit for the Defender roof rack.
Not included: the roof rack itself.









