Overview
The Smittybilt Adjust-A-Mount Defender Rack Mounting Kit, part number AM-4, attaches the Defender roof rack to a roof that has no rain gutter, or to any other flat surface. It is a mounting system rather than a rack, so the roof you mount to decides whether it suits your setup.
A pivoting base plate attaches to the roof through rubber expansion nuts. An upper bracket connects the base plate to the Defender roof rack. Drilling the roof makes the installation permanent.
Key features
- Pivoting base plate
- Rubber expansion nuts fasten the base plate to the roof
- Four clamps with upper extension brackets
- Designed for vehicles without a rain gutter
- Can also mount to other flat surfaces
Before you drill the roof
A roof-mounted rack system depends on how the load is carried through the roof, not only on the rack itself. The base plate spreads the load across the roof panel, so the roof needs to be flat and sound where the plate sits. Look for dents, soft spots and existing seams before choosing a mounting position.
Because drilling is permanent, plan the layout on paper before marking the roof. Measure the distance between the mounting points, check for wiring and headliner clearance above the drill site, and use the right size of bit for the expansion nuts. Seal exposed holes to prevent water from entering the roof.
Roof loads should stay within what the rack and roof can carry. Avoid stacking heavy gear high on the roof, and recheck the mounting positions and rack bolts after the first few trips over rough roads, since vibration can loosen connections.
- Check the roof for dents and soft spots
- Look for wiring and headliner clearance
- Seal drilled holes against water
Specifications
| Brand | Smittybilt |
|---|---|
| Part number | AM-4 |
| UPC | 631410114706 |
| Attachment | Rubber expansion nuts to the roof |
| Included clamps | 4, with upper extension brackets |
| Drilling | Required in the roof |
Vehicle fitment
The mount suits a roof with no rain gutter or another flat surface to fasten to. Confirm your vehicle’s year, model and trim before ordering, and check that your roof is flat where the base plate sits.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Drilling the roof makes this a permanent installation, so confirm the mounting positions before the first hole is drilled.
What’s included
Four clamps with upper extension brackets, plus the rubber expansion nuts that attach the base plate. Not included: the Defender roof rack, which the upper bracket attaches to.









