Overview
The Smittybilt 3 inch by 30 foot recovery strap, part number CC330, is rated for 30,000 lbs and is sold individually. It is yellow and uses double stitched webbing with a double hoop design.
It is 3 inches wide, with a compatible width range of 2-1/8 to 3 inches, which makes it wider than the 2 inch straps in the same line. It suits recovery pulls where the higher rating is needed.
Key features
- Rated 30,000 lbs
- 3 inch width
- 30 foot length
- Yellow color
- Double stitched webbing
- Double hoop design
Strap width and rating
Width and rating work together in a recovery. A wider strap spreads the load across more webbing, but it still needs rated hardware at each end. Choose a strap whose width suits your hooks, D-rings or shackles, and confirm that every connection point is rated for the load you expect to pull.
Webbing is affected by sun, grit and sharp edges. Keep the strap clean and dry, coil it loosely to avoid kinks, and protect it from rough rock edges during a pull. Check the stitching and hoops before each trip, since damage at the ends can reduce the strap’s usefulness.
- Match the width to your recovery hardware
- Keep the strap dry and out of direct sun
- Use a wrap or protector over sharp edges
- Inspect the hoops and stitching before each trip
Specifications
| Brand | Smittybilt |
|---|---|
| Part number | CC330 |
| UPC | 631410082289 |
| Product type | Recovery strap |
| Width | 3 inches, compatible range 2-1/8 to 3 inches |
| Length | 30 feet |
| Load rating | 30,000 lbs working load limit |
| Color | Yellow |
Vehicle fitment
This strap is not tied to a specific vehicle. Choose it by its 30,000 lb rating and width, and check that the width suits your recovery hardware.
Installation notes
Attach the strap to rated shackles or anchor points at each end, and keep the load within the 30,000 lb working load limit.






















