Overview
The Rugged Ridge XHD Replacement Soft Top with Tinted Windows in Black, part number 13728.01, is a sailcloth replacement top for a Jeep soft top frame. Its three-layer design is built to improve insulation and reduce wind sound and flutter. Match your Jeep’s year, model and trim to the frame before ordering.
The top is built from a three-layer design in 20 oz. vinyl coated polyester and cotton fabric. It includes upper door skins and tinted windows made from heavy-duty 30 mil thick glass. Sailcloth is easier to clean than standard soft top fabric and shows fewer waves and wrinkles.
Key features
- Multi-layer sailcloth construction that Rugged Ridge describes as improving insulation
- Upper door skins included with the top
- Tinted windows made from heavy-duty 30 mil thick glass
- Reinforced stitching on the heavy pull areas
- Sailcloth surface that is easier to clean and shows fewer waves and wrinkles than conventional fabric
- Designed to reuse the factory frame and hardware, with no costly extra hardware required
- Made from 20 oz. durable vinyl coated polyester and cotton fabric
Sailcloth care and cleaning
Sailcloth is easier to keep looking tidy than standard soft top fabric, but it still needs regular attention. Rinse loose dirt with water, use a soft brush and mild soap, and rinse thoroughly. Avoid pressure washers held close to the seams, since the force can wear stitching and coatings. Let the top dry fully before folding it or storing it to prevent mildew.
Tinted glass windows should be cleaned with a soft cloth and a non-abrasive cleaner, and inspected for scratches or clouding each season. Check the heavy pull areas and the seams during routine care, because stitching in those spots takes the most strain when the top is raised and lowered. Small loose threads are easier to fix early than after they open into a gap. Store the top off the ground and out of direct heat when it is not on the vehicle.
Specifications
| Brand | Rugged Ridge |
|---|---|
| Part number | 13728.01 |
| UPC | 804314236564 |
| Color | Black |
| Top material | Sailcloth, three-layer design |
| Fabric | 20 oz. vinyl coated polyester and cotton |
| Window type | Tinted |
| Glass thickness | 30 mil |
| Doors included | Upper door skins |
| Hardware | Not included |
Vehicle fitment
Fit depends on the frame, so the top is designed to use the OE frame and hardware, which must be in good condition. Match the year, model and trim to your Jeep before buying.
Match your Jeep’s year, model and trim to the frame before ordering this top.
Installation notes
The top installs with the factory frame and hardware, without costly extra hardware. Inspect the frame and hardware before fitting the new top.
What’s included
One black sailcloth replacement soft top with tinted windows and upper door skins, part number 13728.01.
Not included: Hardware. The factory frame and hardware are reused.
