Overview
The Rugged Ridge Recovery Gear Kit, part number 15104.25, is a bundled set of recovery equipment: a gear bag, an 8 inch snatch block, a recovery strap, a tree trunk protector strap, a pair of D-rings, a winch line dampener and a pair of leather recovery gloves.
Rugged Ridge gives this bundle universal fit rather than a vehicle match, so each piece’s rating is what identifies its capacity.
Key features
- 8 inch snatch block rated 20,000lb
- 2 inch x 30′ recovery strap rated 20,000lb
- 3 inch x 6′ tree trunk protector strap rated 30,000lb
- Pair of zinc-coated D-rings rated 9,500lb
- Winch line dampener and pair of leather recovery gloves
Before you rig a pull
Rigging a pull with a bundled kit means treating each piece as its own component. A snatch block, strap, D-ring and tree protector each have a rating, and the lowest-rated link in the chain limits the whole setup. Lay the pieces out before a pull and confirm that each one matches the others and the load.
Angles and anchor points matter as much as ratings. Keep straps free of sharp edges and avoid twists that concentrate stress. When a snatch block is used, make sure the line runs cleanly through the sheave, and keep bystanders clear of the rigging path during the pull.
- Confirm each rating against the load
- Keep straps clear of sharp edges
- Keep people out of the rigging path
Specifications
| Brand | Rugged Ridge |
|---|---|
| Part number | 15104.25 |
| UPC | 804314218577 |
| Snatch block | 8 inch, 20,000lb |
| Recovery strap | 2 inch x 30′, 20,000lb |
| Tree trunk protector strap | 3 inch x 6′, 30,000lb |
| D-rings | Zinc-coated pair, 9,500lb |
| Fitment | Universal Fit |
Vehicle fitment
This kit is universal fit, so no particular vehicle is named for it. Each piece has its own rating, and none is matched to a specific vehicle.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Match the ratings of the snatch block, straps and D-rings to your winch and vehicle before rigging, since no specific match is given.
What’s included
- Recovery gear bag
- 8 inch snatch block
- 2 inch x 30′ recovery strap
- 3 inch x 6′ tree trunk protector strap
- Pair of zinc-coated D-rings
- Winch line dampener
- Pair of leather recovery gloves
Not included: a winch, which the winch line dampener is meant to work alongside.
