Overview
The Rugged Ridge Eclipse Sun Shade, part RUG13579.76, is a black mesh sun shade for soft-top Jeep Gladiator JT models from 2020 to 2026. It cuts harsh sunlight while keeping the open-air feel of a top-down drive, and it comes in a front half size or a full-length size that also shades rear passengers.
The reinforced mesh has built-in elastic straps, so the shade sits between the windshield and the sport bar without a header channel. This skips the header step that similar products use. The factory soft top clamps stay accessible, so the top still operates normally with the shade in place. Sewn-in bungee cords and a small mesh carrying bag complete the package.
The design suits drivers who want a summer shade they can install and remove without much fuss. When it is not in use, the mesh carrying bag lets the shade fit in almost any compartment of the Gladiator.
Key features
- Reinforced black mesh designed to block UV rays and reduce wind noise.
- Header-free mounting between the windshield and sport bar.
- Sewn-in ball-end bungee cords for a secure fit.
- Stays in place with the top up or down, with no removal needed.
- Does not interfere with the folding windshield.
- Compact enough to store in almost any compartment of the Jeep.
Installing between windshield and bar
Mounting a shade between the windshield and the sport bar relies on tension, so the bungee ends need to seat fully before each trip. Push each ball end into its anchor until it locks, then tug the shade gently to confirm it holds. Recheck the fit after the first few drives, since mesh can settle slightly over time.
Keep the factory top clamps clear when you set the shade so the soft top can still latch and release without fighting the mesh. Inspect the bungee cords for stretching or fraying every few months, and replace any cord that has lost its grip. Fold the shade loosely for storage in its carrying bag to protect the mesh from creasing.
- Confirm both bungee ends are seated before driving
- Keep the top clamps accessible when installed
Specifications
| Brand | Rugged Ridge |
|---|---|
| Part number | RUG13579.76 |
| Coverage | Front and rear (full-length size); the front half size covers front passengers only |
| Color | Black mesh |
| Construction | Reinforced mesh with built-in elastic straps |
| Mounting | Sewn-in bungee cords with ball ends; no header channel |
| Warranty | Limited 5 year |
| Fitment type | Direct fit |
Vehicle fitment
The manufacturer fitment list covers the 2020–2026 Jeep Gladiator JT, including Launch Edition, Overland, Rubicon, Sport and Sport S trims. The shade is made for soft-top models, and no other Jeep generation appears on the list.
Hard-top Gladiators and other Jeep models are not covered. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The shade hooks between the windshield and the sport bar, so the header channel step is skipped. Keep the factory top clamps free when you set the shade, because the design is built to leave them accessible. Check that each bungee ball end seats fully before driving.
What’s included
The Eclipse sun shade with sewn-in bungee cords and a small mesh carrying bag for storage. It comes in a front half size or a full-length size.












