Overview
The Rightline Gear Non-Skid Roof Pad, part 100650, is a 36 inch x 36 inch pad that sits between a car top carrier and the vehicle roof. It keeps the carrier from shifting while protecting the roof. The pad can be cut down to fit underneath smaller carriers.
Key features
- Non-skid surface meant to stop a car top carrier from shifting
- Protects the vehicle roof while the carrier is in use
- 36 inch x 36 inch size
- Can be cut to fit underneath smaller car top carriers
- Used as a safety accessory for car top carrier bags
Using a roof pad safely
A roof pad works between the carrier and the roof, so its job is to keep the carrier from moving while protecting the roof surface. Before loading, clean both the pad and the roof of grit, since trapped sand can scratch the finish as the carrier shifts in use.
Load the carrier evenly and secure it with straps after the pad is in place. Re-check the straps after the first few miles, because bags and boxes settle as they are driven. A pad that has shifted or worn thin should be replaced rather than reused.
Pads of this type suit soft-sided bags and light carriers best. Heavy loads or a carrier with hard edges may need a different protection plan, and the roof’s rated load should guide how much you carry on top.
- Clean the pad and roof before loading
- Re-check straps after the first few miles
- Replace a worn or shifted pad
Specifications
| Brand | Rightline Gear |
|---|---|
| Part number | 100650 |
| UPC | 184633000269 |
| Size | 36 inch x 36 inch |
| Type | Non-skid roof pad |
| Use | Car top carriers |
Vehicle fitment
This pad is not written for a specific vehicle, and no fitment is listed. It is sized for car top carriers, so check that the pad suits your carrier and your roof before using it.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Trim the pad so it sits only under the carrier when the carrier is smaller than the pad.
What’s included
The package is the non-skid roof pad only.
Not included: No car top carrier is included with the pad. Choose a carrier separately and confirm it suits the pad’s size.
















