Overview
The Rhino-Rack Vortex StealthBar in black, 905mm long, part number RSB04B, is a crossbar for vehicles with raised roof rails. Its VGS rubber strip is meant to reduce wind drag and noise and to protect the roof rack and load. End caps are included.
Key features
- Cut to one of 7 predefined lengths for raised roof rails
- VGS rubber strip designed to reduce wind drag and noise
- The VGS strip also protects roof racks and cargo
- End caps come with the bar
Wind noise and roof rack wear
A crossbar on a raised rail sits in the airflow over the windshield, so drag and wind noise are most noticeable at highway speed. A rubber strip along the bar softens that flow and keeps the bar from knocking against the rack. Over time the strip can wear, so look for cracks, flattening, or pieces coming away at the ends.
Length matters for the stability of the load. Measure the space you need between your rails before picking the cut length, and remember that a shorter bar leaves less room for wide cargo. Mounting hardware should be checked for tightness after the first few drives.
- Check the VGS strip for tears each season
- Re-tighten mounting bolts after the first few drives
- Keep the end caps in place when the bar is bare
Specifications
| Brand | Rhino-Rack USA |
|---|---|
| Part number | RSB04B |
| Color | Black |
| Length | 905mm |
| Rubber strip | VGS |
| Length options | 7 predefined lengths |
| End caps | Included |
Vehicle fitment
Use requires raised roof rails. Confirm your rails are raised and that the 905mm length suits your roof before ordering.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Fitting the bar to a raised roof rail uses the separate RSK01 hardware kit, which is designed for that purpose.
What’s included
End caps and the VGS rubber strip come with the bar.
Not included: mounting hardware for raised roof rails, available separately as the RSK01 kit.












