Overview
The T-Rex Grilles 6525661 is a Revolver Series bumper grille overlay in black, made for the 2017–2018 Ford F-150 Raptor. The overlay comes with two 3in. ZROADZ LED Cube Lights, so it pairs a grille overlay with auxiliary lighting. It is a single piece (1 pc.) with a laser cut mesh face and black powder coat.
Key features
- Laser cut mesh pattern
- Black powder-coat finish
- Two 3in. ZROADZ LED Cube Lights included
- Single piece (1 pc.)
- Direct-fit listing for the 2017–2018 Ford F-150 Raptor
Lighting and wiring basics
Auxiliary lights draw more current than the factory bumper circuits are usually built for, so a dedicated fused circuit is the safer route. Run the feed directly from the battery area through a relay, and put the switch where it can be reached from the driver’s seat. Keep wiring away from hot exhaust parts and sharp edges, and secure it with clips at regular intervals.
Local road-use rules often govern when auxiliary lights may be on, so learn them before you drive with the lights active. Aim the lights after mounting on level ground, and check the alignment again after suspension work or long runs on rough roads.
- Use a dedicated fused circuit with a relay
- Place the switch within easy reach
- Secure wiring away from heat and sharp edges
Specifications
| Brand | T-Rex Grilles |
|---|---|
| Part number | 6525661 |
| UPC | 609579034616 |
| Product line | Revolver Series |
| Style | Bumper grille overlay, laser cut mesh |
| Finish | Black powder-coat |
| Lighting | Two 3in. ZROADZ LED Cube Lights |
| Pieces | 1 pc. |
| Fit type | Direct fit |
Vehicle fitment
It fits the 2017–2018 Ford F-150 Raptor. Other F-150 trims and model years are outside this fit.
Earlier and later F-150 generations are not on the list. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The lights ship with the overlay as a set, so the wiring needs a fused power feed, and auxiliary lights are subject to local road-use rules in many areas. The product specs describe no wiring steps, so follow the lighting’s own connection instructions.
What’s included
One overlay (1 pc.) with two 3in. ZROADZ LED Cube Lights.
Not included: A power supply and switch for the lights. Plan a separate fused power feed for the wiring.









