Overview
The Reese Sidewinder Spacer Kit, part number 61301, is a spacer kit for the Sidewinder turret on fifth wheel trailer hitch mounts. It is intended for use when replacing a 12.5 in. pin box.
The kit is universal fit. Because it is a hitch mount component sized for a 12.5 in. pin box, confirm it matches your turret and pin box before ordering.
Spacers and pin box replacement
A fifth wheel turret holds the pin box and sets the height of the coupling. When a pin box is replaced, a spacer kit can make up the difference between the old and new box so the trailer sits at the intended height and the locking mechanism lines up. Height and alignment are the main reasons to check spacers before towing.
Before using a spacer, measure the turret opening, the pin box flange and the mounting holes. Stacking spacers or using a mismatched pin box can shift loads onto bolts that were not designed for them. Choose hardware suited to the turret and replace fasteners that show stretch or corrosion when the box is changed.
Check the assembly after the first few trips. Look for gaps between the spacer and the turret, loose bolts, cracks in the mounting plate and any movement of the pin box when the trailer is coupled. Retorque fasteners to the turret’s specification and inspect the spacer again at each service interval.
- Measure the pin box flange before ordering
- Use fasteners suited to the turret
- Recheck bolts after early towing
Specifications
| Brand | Reese |
|---|---|
| Part number | 61301 |
| UPC | 16118107999 |
| Product type | Spacer kit |
| Turret | Sidewinder |
| Pin box size | 12.5 in. |
Vehicle fitment
This is a fifth wheel mount component sized for a 12.5 in. pin box. Confirm fit for your vehicle’s year, model and trim before ordering, and check it against your turret before installing.
Confirm your vehicle’s year, model and trim before ordering.









