Overview
The Rampage Silver Multiguard Cover, part number 2201R, is a 4-layer car cover with highly reflective silver fabric and built-in venting. It fits Jeep CJ5, CJ7, Wrangler LJ, TJ and YJ models.
Four layers of non-woven polypropylene make up the fabric: a rugged Spun Bond outer layer, two melt blown middle layers and a softer inner layer. Together they are designed to block paint contaminants and produce a water resistant fabric that protects the finish while letting trapped moisture out through the vents. Pre-installed grommets accept a lock and cable for securing the cover against theft and wind.
Key features
- Highly reflective fabric intended to protect paint
- Vents that allow trapped ambient moisture to escape
- Four layers of non-woven polypropylene with melt blown middle layers
- Soft inner layer and backing that help protect the finish
- Double-stitched elastic hems for a snug fit
- Pre-installed grommets for a lock, cable and storage bag
Heat and moisture under a cover
Reflective fabric reduces the heat a cover absorbs from direct sun, which helps the paint and interior stay cooler on bright days. That benefit only works if the cover is well ventilated, since trapped warm moisture can cause condensation. The vents on this cover are there to let that moisture out, so keep them clear of dirt and check that they stay open when the cover is on.
Multi-layer fabric is strongest when it is kept in good shape. Inspect the outer layer for abrasion where it rubs on roll bars, hardtops or tow hitches, and look at the seams after windy stretches. A patched or torn layer will weaken protection, so repair or replace the cover before it is used on a Jeep that sits outdoors for long periods.
- Keep vents clear of dirt and debris
- Check the outer layer for abrasion spots
- Inspect seams after windy weather
- Dry the fabric before folding it away
Specifications
| Brand | Rampage |
|---|---|
| Part number | 2201R |
| UPC | 873563009151 |
| Color | Gray |
| Layers | 4-layer non-woven polypropylene |
| Outer layer | Spun Bond |
| Middle layers | Two melt blown layers |
| Hems | Double-stitched elastic |
| Securing | Pre-installed grommets for lock and cable |
| Included | Lock, cable and storage bag |
Vehicle fitment
It fits Jeep CJ5 from 1976 to 1983, CJ7 from 1976 to 1986, Wrangler LJ from 2004 to 2006 (Unlimited and Unlimited Rubicon), Wrangler TJ from 1997 to 2006, and Wrangler YJ from 1987 to 1995, in the trims covered for each. Confirm fit for later Wrangler generations such as JK and JL before ordering.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Pull the elastic hems snug, then secure the cover with the lock and cable through the pre-installed grommets. Jeeps with oversized bumpers or oversized spare tires are excluded.
What’s included
The lock, cable and storage bag are included.
















