Overview
The Putco Optic 360 LED fog lamp bulb, part PUT250010W, is a replacement LED bulb built with 30 watt Cree LEDs and a 360 degree lamp angle. It is a high power fog lamp bulb with over 600 lumen output and over 50,000 hours of lifetime.
The bulb has a machined CNC billet aluminum body with an optic lens and runs on DC 12-24 voltage. It is Universal Fit, so confirm the bulb base and fog lamp housing against your current bulb before installing.
Key features
- 30 watt Cree LEDs
- Over 600 lumen output
- Over 50,000 hours of lifetime
- 360 degree lamp angle
- Machined CNC billet aluminum body with optic lens
- DC 12-24 voltage
Before you install
High power LED bulbs produce heat at the base, so the housing needs enough airflow for the bulb to run cool over time. Look at how the bulb is cooled, since a body designed to shed heat tends to hold up better in a sealed fog lamp. After installing, check that the lamp does not feel unusually hot after a long run and that the lens is not fogging from trapped moisture.
Beam pattern matters too. A wide lamp angle spreads light sideways, which can reduce the distance the light reaches down the road, so aim the fog lamps low after installation. Clean the lens regularly, and replace a cracked or clouded lens before it blocks light output. Corroded sockets can cause flicker, so inspect the connector whenever the bulb is changed.
Specifications
| Brand | Putco |
|---|---|
| Part number | PUT250010W |
| Bulb type | LED fog lamp bulb |
| LED power | 30 watt Cree LEDs |
| Light output | Over 600 lumen |
| Lifetime | Over 50,000 hours |
| Voltage | DC 12-24 |
| Lamp angle | 360 degree |
| Body | Machined CNC billet aluminum with optic lens |
| Fitment | Universal Fit |
Vehicle fitment
This bulb is Universal Fit and is not built for one vehicle. Fit depends on the bulb base and the fog lamp housing it goes into.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Check that the bulb base matches your fog lamp socket before installing. Because these are 30 watt LEDs, wire the fog lamps through a fused relay and check local rules on auxiliary lights.
What’s included
Check the package contents and any hardware against your installation before starting.











