Overview
The Pro Comp 26145OE is an 8-lug gold spline lug kit in 14×1.5 thread size. It is an open end, heat treated (H/T) set for wheels with the matching stud layout.
Lug kits are wheel hardware rather than vehicle parts, so the stud count, thread and style decide the fit.
Key features
- Gold finish
- Heat treated (H/T)
- 14×1.5 thread size
- Spline style
- Open end design
Stud fit and thread care
Lug nuts work with the wheel studs, so the thread and seat matter as much as the finish. A spline style grips the wheel through ridges that engage a matching seat, so the nut must be the same style as the wheel. Before fitting, clean the threads and test each nut by hand to make sure it runs freely without cross-threading. Tighten to the torque your wheel and vehicle call for.
Heat treated hardware is made to resist stretching under repeated tightening, but it still benefits from periodic inspection. Look for rounded spline edges, flattened seats, or rust on the shank, and replace any nut that shows damage. Re-check torque after the first few drives on a new wheel, since seats can settle as the wheel beds in. Keep a few spare nuts in the vehicle for roadside repairs.
Specifications
| Brand | Pro Comp Alloy Wheels |
|---|---|
| Part number | 26145OE |
| UPC | 844658029866 |
| Thread size | 14×1.5 |
| Style | Spline, open end |
| Finish | Gold |
| Heat treated | Yes (H/T) |
| Lug count | 8 |
Vehicle fitment
Match the 8-stud count, 14×1.5 thread and spline style to the wheel before choosing this kit.
Confirm your vehicle’s year, model and trim before ordering.
What’s included
The 8-lug gold open end spline lug kit, part number 26145OE.
























