Overview
The Oracle Lighting 15-inch red LED flex strip, part number ORC3805-003, is flexible and waterproof, suited to adding color to a vehicle. The retail pack holds two 15-inch strips, and each one can be trimmed to a shorter length at the marked cut points.
Two 15-inch waterproof strips come packed with 3M adhesive, which suits indoor or outdoor mounting. The strip runs on 12V accessory wiring with a current draw of .35A. A 1 year warranty applies.
Key features
- Flexible, waterproof red LED strip
- Trim at the marked cut points for shorter runs
- 3M adhesive for indoor or outdoor mounting
- Two 15-inch strips per retail pack
- Current draw of .35A for 12V accessory wiring
Mounting and wiring tips
Flexible LED strips are usually mounted on clean, dry, flat surfaces where the adhesive can bond fully. Wipe the surface with a solvent that leaves no residue, let it dry, and press the strip down firmly for about a minute. Adhesive bonds weaken on dusty or oily surfaces, so preparation matters more than pressure.
Plan the route for the wiring before peeling the backing. Keep the run away from hot exhaust parts and moving linkages, and use a grommet where a cable passes through metal. Accessory LED strips draw little current, but an inline fuse protects the wire if a short develops.
- Clean and dry the mounting surface
- Route wiring away from heat and moving parts
- Use an inline fuse on the 12V feed
Specifications
| Brand | Oracle Lighting |
|---|---|
| Part number | ORC3805-003 |
| Color | Red |
| Strip length | 15 inch |
| Strips per retail set | 2 |
| Water resistance | Waterproof |
| Adhesive | 3M |
| Current draw | .35A |
| Warranty | 1 year |
Vehicle fitment
This strip is not vehicle-specific, so it has no year, make or model fitment. Decide where it will mount and measure the run before you cut.
Installation notes
Trim the strip only at the marked cut points shown on the packaging diagram. Wire it to a 12V supply with an inline fuse, the way you would wire any accessory light.
What’s included
Two 15-inch waterproof strips come in the retail pack, along with 3M adhesive.















