Overview
The Omix-Ada replacement low tone horn, part number 17249.01, is a black horn with a 3-1/2 in diameter and is made in the USA. It fits the 1976 to 1983 Jeep CJ5, the 1976 to 1986 Jeep CJ7, the 1981 to 1985 Jeep Scrambler and the 1987 to 1995 Jeep Wrangler (YJ).
Key features
- Black horn, 3-1/2 in diameter
- Low tone with a 400 Hz frequency and 125 decibel rating
- Made in the USA
- Kit includes mounting hardware and instructions
Horn placement and sound
Horns are usually mounted behind the grille or on a bracket near the radiator support, where airflow and clearance make the most sense. Keep the horn body free from rubbing, and use a clean ground strap so the current returns without resistance. A loose or painted mounting point can change the sound noticeably.
Horns with deeper tones can draw more current than a standard horn, so wiring should be sized to carry that load without warming up. A relay between the switch and horn protects the steering column contacts. Check the fuse rating against the horn you install and replace any corroded terminals during the job.
- Mount the horn securely to clean metal
- Use a clean ground to the chassis
- Add a relay if the wiring runs warm
- Recheck the fuse after installation
Specifications
| Brand | Omix-Ada |
|---|---|
| Part number | 17249.01 |
| UPC | 804314038151 |
| Color | Black |
| Diameter | 3-1/2 in |
| Frequency | 400 Hz |
| Sound level | 125 decibels |
| Voltage | 12 volt |
| Terminal | Single terminal |
| Made in | USA |
Vehicle fitment
It fits the 1976 to 1983 Jeep CJ5 (Base, Golden Eagle, Laredo, Limited, Renegade), the 1976 to 1986 Jeep CJ7 (Base, Golden Eagle, Golden Hawk, Laredo, Limited, Renegade), the 1981 to 1985 Jeep Scrambler (Base, Laredo, Renegade, SL, SR) and the 1987 to 1995 Jeep Wrangler (YJ) (Base, Islander, Laredo, Renegade, Rio Grande, S, SE, Sahara, Sport).
Models outside this list, such as the Cherokee XJ, are not covered. Confirm fit for your vehicle’s year, model and trim before ordering.
Installation notes
The kit includes mounting hardware and instructions, so use those instructions for mounting. The horn has a single terminal rated at 12 volt.
What’s included
The kit includes mounting hardware and instructions. Confirm whether a wiring harness or relay is needed for your installation.








