Overview
The Omix-Ada liftgate glass seal, part number 12304.02, is made for factory hardtops that have steel or fiberglass liftgates. It will not work on aftermarket hardtops because of its square cut bottom corners. UPC 804314038083.
The seal has two loose ends that must be sealed together with weather strip sealer, so plan for that step before fitting it.
Key features
- Made for factory hardtops with steel or fiberglass liftgates
- Square cut bottom corners; not suited to aftermarket hardtops
- Two loose ends joined with weather strip sealer
- Identified as item #4 in the diagram
Hardtop seal care
A liftgate glass seal is what keeps water and dust out where the glass meets a factory hardtop, so its shape and fit matter. Square cut bottom corners fit the factory channel, which is why the seal is matched to factory hardtops and not aftermarket ones. If the corners are forced into a different channel, the seal may twist and leave gaps.
Joining the loose ends correctly is the step most often rushed. Clean both ends, apply weather strip sealer evenly and press them together until the sealer sets, following the instructions on the sealer’s container. Look for a smooth, continuous joint afterward, because a gap at the join is a common route for water.
- Dry and clean both ends before joining
- Keep the sealer off the glass surface
- Inspect the joint after the first wash
Specifications
| Brand | Omix-Ada |
|---|---|
| Part number | 12304.02 |
| UPC | 804314038083 |
| Liftgate type | Steel or fiberglass |
| Diagram reference | Item #4 |
| Bottom corners | Square cut |
Vehicle fitment
Fit is for factory hardtops with steel or fiberglass liftgates. Match the seal to your hardtop type before ordering.
Aftermarket hardtops are excluded. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The two loose ends are sealed together with weather strip sealer, which is a separate step from fitting the seal.
What’s included
A single seal is included.
Not included: Weather strip sealer is needed to join the loose ends and must be supplied by the installer.









