Select your vehicle

LUND Tailgate Seal – 30002

Lund

Check today’s price on Amazon

Check out with your Amazon account. Amazon handles delivery and returns.

Slickrock 4X4 is a participant in the Amazon Associates Program. As an Amazon Associate we earn from qualifying purchases.

  • EPDM rubber tailgate seal, part 30002
  • Cut to fit 10 ft. length
  • Comes with 3M+ adhesive tape
  • Universal design for all makes and models

Description

Overview

The Lund Tailgate Seal, part number 30002, is a rubber seal that helps keep dust and moisture out of the tailgate opening. It is made from EPDM rubber and is cut to fit a 10 ft. length.

It is a universal design for all makes and models, so it is not matched to one vehicle. It comes with 3M+ adhesive tape.

Key features

  • Rubber seal to help prevent dust and moisture from getting in
  • EPDM rubber built to stand up to the elements
  • Cut to fit 10 ft. length
  • Universal design for all makes and models

Weatherproofing a tailgate opening

Rubber seals around a tailgate work hard, flexing each time the gate opens and closing against weather, road spray and dust. Over time EPDM can harden or flatten, leaving gaps where water and grit can enter. Check the seal for cracks, compression set and places where it has lifted away from the edge. A seal that looks fine at a glance can still leak at the corners, so run a hand along the full length.

Adhesive-backed seals need a clean, dry surface to hold, so remove old residue with a suitable cleaner and let the surface dry fully before applying. Press the seal firmly along the full run, and avoid stretching it at corners, since stretched rubber can pull back. Plan the cut and joins carefully so the seal meets neatly at the ends. Test the closed gate after a rain to confirm the seal is holding.

  • Inspect the seal for cracks and flattening
  • Clean the surface before reapplying
  • Avoid stretching the rubber at corners
  • Replace the seal once gaps appear

Specifications

Brand Lund
Part number 30002
UPC 25067037097
Material EPDM rubber
Length Cut to fit 10 ft.
Adhesive 3M+ adhesive tape
Fitment Universal fit

Vehicle fitment

No specific vehicle, year or chassis applies, so measure your tailgate opening before cutting the seal to length.

Confirm your vehicle’s year, model and trim before ordering.

Installation notes

Clean the mounting surface before applying the 3M+ adhesive tape so the seal bonds properly.

What’s included

A 10 ft. length of EPDM rubber seal with 3M+ adhesive tape.

SKU: LII30002 Category:

Specification

Shipping weight 1.40 lbs
Package dimensions 11.00 × 11.00 × 2.50 in
brands

Questions & Answers

Is the Lund Tailgate Seal made to fit a specific vehicle?

No specific vehicle is matched to this seal. It is a universal design for all makes and models, so confirm your vehicle's year, model and trim before ordering and measure your tailgate opening.

What material is the Lund tailgate seal?

It is made from EPDM rubber, which is designed to stand up to the elements. The seal helps keep dust and moisture out of the tailgate opening and is cut to fit a 10 ft. length.

Does the seal come with adhesive?

Yes. It comes with 3M+ adhesive tape, which is used to bond the seal to the tailgate opening. Clean the mounting surface first so the seal bonds properly, and cut the 10 ft. length to fit your opening.

How can I tell if the tailgate seal has failed?

Look for cracks, flattened sections, or places where the seal has lifted from the edge. Water inside the cargo area or dust on the bed floor after rain also points to a gap that needs attention.

Does the seal need to be replaced when the tailgate is painted?

Usually not, unless the paint work or surface prep disturbed the seal or its adhesive. Keep the seal clear of paint overspray and let fresh paint cure before pressing the seal back in place.

Find it on Amazon

See today’s price and delivery options on Amazon, and check out with your Amazon account.

Check today’s price on Amazon