Overview
The Kentrol 30417 is a stainless steel mirror kit that mounts to the windshield hinge. It fits 1959-1986 Jeep CJ models, the 1981-1985 Scrambler and the 1987-1995 Wrangler YJ. The mirrors have brackets for the windshield hinge, and no drilling is required.
The driver side arm mounts out to the side of the vehicle. The passenger side arm mounts forward, so the driver looks through the corner of the windshield to see down the side of the vehicle.
The mirrors work on factory CJ windshield hinges. They also fit Kentrol 30403 windshield hinges when installed on 1987-1995 Wrangler YJ models, but they will not work on factory YJ hinges. The kit is made from 304 surgical stainless steel with stainless steel hardware.
Key features
- Stainless steel mirror kit that mounts to the windshield hinge
- No drilling required
- Works on factory CJ windshield hinges
- Fits Kentrol 30403 hinges on 1987-95 YJ Wranglers
- Will not work on factory YJ hinges
- Made of 304 stainless steel with stainless steel hardware.
Windshield hinge mounting
Windshield-mounted mirrors are a common choice on older Jeeps because they keep the view down the sides of the body when the windshield is upright. Their position depends on the hinge, so the mount is only as solid as the hinge beneath it. Before fitting, check the windshield hinge for cracks, corrosion and loose fasteners, since a worn hinge can allow the mirror to sag or vibrate on rough trails.
When a windshield is folded down, mirror arms can knock or scratch the body, so check arm length and clearance before each trip. Stainless steel resists rust well in wet conditions, but salt and grit can still build up on hinge threads. Rinse the mounting area after trail use and check the fasteners at routine service to keep the mirrors steady.
- Inspect windshield hinges for cracks before mounting
- Check mirror clearance when the windshield is folded
- Use the correct hinge for the vehicle model
- Rinse mounting hardware after salt or mud exposure
Specifications
| Brand | Kentrol |
|---|---|
| Part type | Mirror kit |
| Material | Stainless steel (304) |
| Color | Stainless steel |
| Mount location | Windshield hinge |
| Hardware | Stainless steel hardware |
| Installation | No drilling required |
| Compatible hinge | Factory CJ hinges; Kentrol 30403 hinges on 1987-95 YJ |
| Not compatible | Factory YJ hinges |
| Fit type | Direct fit |
Vehicle fitment
The manufacturer fitment list for the Kentrol 30417 includes:
- 1959–1983 Jeep CJ5 (Base, Golden Eagle, Laredo, Limited, Renegade)
- 1959–1975 Jeep CJ6 (Base)
- 1976–1986 Jeep CJ7 (Base, Golden Eagle, Golden Hawk, Laredo, Limited, Renegade)
- 1981–1985 Jeep Scrambler (Base, Laredo, Renegade, SL, SR)
- 1987–1995 Jeep Wrangler (YJ) (Base, Islander, Laredo, Renegade, Rio Grande, S, SE, Sahara, Sport)
The fitment covers CJ5, CJ6, CJ7, Scrambler and Wrangler YJ models. TJ and later Wranglers are not covered. YJ vehicles with factory hinges are excluded, so they need Kentrol 30403 hinges. Check year, model and trim against your vehicle before ordering.
Installation notes
Clean and dry the mounting surfaces before fitting, and test-fit the mirror arms before final tightening.
Tighten the fasteners firmly, then re-check them after the first few miles of driving.
What’s included
Mirror kit with stainless steel hardware.
Not included: Kentrol 30403 windshield hinges (needed on YJ Wranglers).











