Overview
The Kentrol Delrin door hinge liners, item 70005, are black Delrin replacements for factory door hinge bushings that deteriorate and fail. They fit 1987 to 2006 Jeep Wrangler TJ and YJ, and also 1976 to 1986 CJ models.
Key features
- Black Delrin bushings replace factory hinge bushings
- Installation tool included
- It fits 1987 to 2006 Wrangler TJ and YJ.
- It also fits 1976 to 1986 CJ models.
Matching liners to your Jeep
Older Jeep bodies age differently from newer ones, and hinge bushings on a TJ or YJ often sit behind a door that has seen decades of use. Before buying, check the play at the top and bottom hinge, since a door that sags at one corner usually points to hinge wear rather than a latch problem. Owners of a CJ should confirm the body and hinge layout first, because older hinges vary more between builds.
When the bushings are replaced, the hinge pins and the bolts that hold each hinge to the body are worth checking at the same time. Clean the hinge knuckles, remove any rust with a wire brush, and apply a light grease to the pin before reassembly. Recheck the door gap and latch engagement after a few drives, since small adjustments are often needed once the hinges settle.
- Check hinge pins for grooves or bends
- Clean hinge knuckles before reassembly
- Recheck the door gap after the first drives
Specifications
| Brand | Kentrol |
|---|---|
| Part number | 70005 |
| UPC | 812421024714 |
| Material | Black Delrin |
| Included | Installation tool |
| Fit listed | 87-06 Wrangler TJ/YJ; 76-86 CJ |
Vehicle fitment
The stated fit is 87-06 Wrangler TJ/YJ, which covers the 1987 to 1995 YJ and 1997 to 2006 TJ, and 76-86 CJ models.
Not stated to fit the JK Wrangler or the JL generation from 2018.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The included installation tool removes the factory bushings so the Delrin liners can go in.
What’s included
Use the included installation tool to remove the factory bushings, then fit the black Delrin liners.
















