Overview
The Jeep Trail Rated Badge, part number 55157317AB, is a multi-color Mopar decal showing the Trail Rated badge. It is a decal rather than a nameplate, so it applies to a panel instead of being bolted on.
It carries the Trail Rated mark used across Jeep models. It is universal fit, so it is not tied to a single year, model or trim.
Key features
- Multi-color design
- Decal type for panel application
- Engineered by Mopar with production-grade materials.
- Universal fit, not vehicle-specific
Decal application and care
Decals depend on the panel surface for their bond, so preparation matters more than the badge itself. Before placing one, wash the spot with a mild cleaner and dry it completely. Work in shade at moderate temperatures so the adhesive settles evenly. Set the decal in position with masking tape first, then press from the center outward to push out trapped air without stretching the vinyl.
Decals on painted body panels can lift over time when road grime, heat and strong solvents reach the edges. Inspect the corners every so often. A slightly lifted corner can sometimes be reset with gentle warmth and pressure, but a torn or badly faded decal is usually better replaced than patched, since a new one bonds to clean paint far more reliably.
- Test placement with masking tape before peeling the backing
- Keep pressure washer spray away from the decal edges
- Lift residue with a plastic scraper and a gentle adhesive remover
Specifications
| Brand | Jeep |
|---|---|
| Part number | 55157317AB |
| UPC | 70000656495 |
| Color | Multi |
| Type | Decal |
Vehicle fitment
This decal is universal fit and is not vehicle-specific. Pick a flat spot on the body panel for placement.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Apply the decal to a clean, dry panel. Wax and dirt on the surface can stop the adhesive from holding.
What’s included
Check the package contents against your installation before starting.












