Overview
The Jeep 82208453AB is a rubber receiver hitch plug with the Jeep logo on its face. It fits all 2 hitch receivers and plugs an unused receiver opening. Measure your receiver opening before ordering to confirm the fit.
Keeping an unused receiver clear
An unused hitch receiver collects road grime, water and grit, and that debris can build up inside the tube and make a later hitch install harder. A plug keeps those out while the opening sits empty. Rubber plugs are simple to use, but the rubber can dry out, harden or shrink with heat and cold, so look it over each season and replace one that cracks or no longer sits flush.
Before fitting a plug, clean the receiver tube with a stiff brush so it seats fully and no loose rust or mud gets trapped behind it. If the fit is snug, a thin film of grease on the outer edge can help it slide in, but it should never be hammered or forced. Pull the plug before attaching any hitch accessory, and check the tube for damage while it is open.
- Inspect the rubber for cracks and hardening each season
- Clean the receiver tube before inserting the plug
- Remove the plug before fitting any hitch accessory
Specifications
| Brand | Jeep |
|---|---|
| Part number | 82208453AB |
| UPC | 822084530002 |
| Material | Rubber |
| Design | Jeep logo |
| Receiver fit | All 2 hitch receivers |
Vehicle fitment
No vehicle years, makes or models are named for this plug. Measure your receiver opening and compare it with the stated receiver fit before using it.
Confirm your vehicle’s year, model and trim before ordering.
What’s included
The rubber receiver plug with the Jeep logo.














