Overview
The Omix-Ada 11210.12 is an OE style hood catch bracket with a black finish. Use one bracket per side of the hood.
Match your year, model and trim to the bracket before ordering, since it must line up with the latch.
Hood latch alignment
A hood catch bracket supports the latch and keeps the hood closed firmly while driving. Because it bears load at the hood edge, the mounting holes should be clean and undamaged before the bracket is bolted down. Misaligned brackets can cause the hood to rattle, sit unevenly, or fail to engage the latch fully.
Check the hood’s gap and height after installing the bracket, then adjust the position so the latch engages cleanly. Rubber bumpers and cushions often wear with the bracket and are worth inspecting at the same time. Recheck the bolts after the first few drives, since vibration can loosen them.
- Inspect the mounting holes before bolting down
- Adjust for even hood gap and height
- Check rubber bumpers and cushions for wear
- Recheck bolts after early drives
Specifications
| Brand | Omix-Ada |
|---|---|
| Part number | 11210.12 |
| UPC | 804314254155 |
| Part type | Hood catch bracket |
| Style | OE style |
| Finish | Black |
| Quantity guidance | Use one per side |
Vehicle fitment
Check the bracket against your hood latch before fitting, since the mounting position must line up with the latch.
Confirm your vehicle’s year, model and trim before ordering.
What’s included
Check the package contents against your planned installation, including any hardware and the latch you will reuse.









