Overview
The Hi-Lift Jack 3 inch x 30’ is a polyester recovery strap for winching and vehicle recovery, designed for use with a Hi-Lift Jack. It is rated to a 30,000 lb (13,607 kg) break strength and has reflective loop liners that make both connecting points easier to see during night recovery.
It is universal fit and is not built for one vehicle model. It suits slower, more exact extraction work, where a controlled pull matters more than a fast one.
Key features
- Polyester material for a controlled pull
- Polyester construction intended to reduce dangerous recoil
- Designed for slower, more exact extraction requirements
- Reflective loop liners that shine in low light to show both connecting points
- 30,000 lb (13,607 kg) break strength
Winching safety and setup
Winching and recovery straps work best when the load is applied steadily. A strap under tension stores energy, so a sudden jerk on a stuck vehicle can produce a sharp snap-back. Setting the strap so that it runs straight between the anchor and the vehicle, with no kinks or twists, helps keep the pull predictable.
Inspect the strap before each use. Look for cuts, fraying along the edges, stitch damage at the loops, and stiff or discolored patches, which can point to heat or chemical exposure. Retire a strap that shows any of these signs. Keep it clean and dry, and store it out of direct sunlight in a bag so the webbing does not rub against sharp edges.
Pair the strap with a suitable anchor, such as a rated recovery point or a tree protector, and use shackles rated for the load. Keep bystanders out of the pull line, and never stand beside or inside a loop under tension.
- Check the webbing for cuts and fraying before each pull
- Keep the strap out of direct sun and away from sharp edges
- Use a tree trunk protector and rated shackles at anchor points
- Stay clear of the strap line during any pull
Specifications
| Brand | Hi-Lift Jack |
|---|---|
| UPC | 52767003305 |
| Width | 3 inch |
| Length | 30’ |
| Material | Polyester |
| Break strength | 30,000 lb (13,607 kg) |
| Loops | Reflective loop liners |
Vehicle fitment
The Hi-Lift Jack 3 inch x 30’ strap is universal fit and is not vehicle-specific. No year, make or model fitment is given for it. Check that the 3 inch width and 30,000 lb break strength suit your recovery setup and the loads you expect to pull.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Recovery straps stretch and store energy under load, so keep people and bystanders clear of the strap line during any pull. The reflective loops at each end help both connecting points stay visible during night recovery.
What’s included
One 3 inch x 30’ strap with reflective loop liners.
Not included: A Hi-Lift Jack or other recovery equipment must be bought separately.














