Overview
The Hella H124V is an H1 halogen replacement bulb rated 24V 70W, built with a P14.5S base and T2.5 bulb size. It is a bulb-type replacement, not a vehicle-specific part, so the H1 designation and base type decide whether it seats in your lamp.
Use it to replace a burned-out H1 halogen bulb in a 24V lamp circuit. Hella part number H124V is the number to match against the original bulb.
Matching a 24V lamp circuit
A 24V bulb is built for the voltage of its circuit, so it should only be fitted where the lamp runs on the same system. Using a bulb on a different voltage can shorten its life or cause it to fail quickly. Before replacing an H1 halogen bulb, confirm the lamp’s voltage and that the bulb is the right type for that circuit.
H1 halogen bulbs run hot, and the base must seat fully to keep the connection stable. A loose or worn socket can cause flicker, uneven output and heat stress on the wiring. Clean the socket contacts and inspect the wiring harness when a bulb fails early, since these often show the cause.
- Confirm the lamp runs on the same system voltage
- Seat the P14.5S base fully and check the bulb sits square
- Inspect the socket for heat marks and corrosion
- Replace bulbs in pairs where both lamps should match
Specifications
| Brand | Hella |
|---|---|
| Part number | H124V |
| UPC | 760687143512 |
| Bulb type | H1 halogen |
| Voltage | 24V |
| Wattage | 70W |
| Base | P14.5S |
| Bulb size | T2.5 |
Vehicle fitment
It is an H1 halogen bulb rated 24V 70W with a P14.5S base, and it is a bulb-type replacement rather than a vehicle-specific part. Check the H1 type, base and wattage against your lamp before installing it.
Confirm your vehicle’s year, model and trim before ordering.
What’s included
The H1 halogen bulb described above. No other contents are listed.









