Overview
The Go Rhino SRM 400 Roof Rack, part ORP5934048T, is a black powder-coated aluminum roof rack with four planks, measuring 56 inches wide, 58 inches long and 16 inches high. Go Rhino says installation does not require drilling.
The rack is universal fit and mounts to roof crossbars without drilling. Cross bars are not included, so check the mounting setup before ordering.
Key features
- Four planks in an aluminum rack
- Black powder coat finish
- 56 inches wide and 58 inches long
- 16-inch height
- Drilling not required for installation
- Cross bars are not included
Roof load and crossbar choice
A roof rack adds weight high on the vehicle, which raises the center of gravity and changes steering feel, especially in crosswinds. Keep loads light, spread them across the planks, and secure everything with straps or cargo nets. The roof’s own load limit and the crossbars set the real ceiling, so respect them rather than relying on the rack alone.
Because this rack is aluminum with a powder-coated finish, the most common wear points are the coating at the feet and the fasteners. Scratches that expose bare metal can be touched up with a matching paint pen to slow corrosion. After rough off-road sections, check that bolts remain snug and that the rack has not shifted on its mounts.
Think about what the rack will carry before choosing crossbars. Long items such as kayaks or lumber need crossbars spaced to support them without overhang bending the planks.
- Spread loads evenly across the planks
- Touch up coating chips before corrosion starts
- Recheck fasteners after rough trails
- Use straps or nets to hold cargo in place
Specifications
| Brand | Go Rhino |
|---|---|
| Product line | SRM 400 |
| Part number | ORP5934048T |
| Material | Aluminum |
| Finish | Black powder coat |
| Length | 58 inches |
| Width | 56 inches |
| Height | 16 inches |
| Number of planks | 4 |
| Roof rack type | Roof rack |
| Drilling | Not required |
| Cross bars included | No |
Vehicle fitment
Go Rhino lists universal fit, so the rack is not tied to one vehicle model. Roof racks still depend on the roof they mount to, so compare the 56 by 58 inch footprint and mounting points with your vehicle before installing.
Confirm your vehicle’s year, model and trim before ordering. Compare the 56 by 58 inch footprint and mounting points with your roof before installing.
Installation notes
The rack installs without drilling. Because cross bars are not included, check whether your mounting setup needs separate cross bars before fitting the planks.
What’s included
The rack has four planks, made of aluminum with a black powder coat finish.
Not included: cross bars.









