Overview
The Go Rhino RHINO Charger 2 RC2 LR Complete Bull Bar Kit, part number 5514211T, is a textured black front bull bar kit that requires no drilling. The kit includes the bull bar, mounting brackets, a skid plate, 3 in. tubing and 2 3 in. LED lights.
Key features
- Complete kit with bull bar and skid plate
- Mounting brackets included
- No drilling is required, and the included mounting brackets are used.
- Textured black finish
- 3 in. tubing
- Includes 2 3 in. LED lights
Planning the front bar install
A front bull bar changes how the vehicle meets obstacles, adds weight at the nose and shifts the balance of the front end. Bars with a skid plate and light mounts work best when the mounting points are clean and the fasteners are checked at regular intervals.
Front-mounted sensors and cameras can be affected by a bar, depending on the vehicle. Check sensor positions against the bar before installing, and plan any light wiring through a fused relay. Route cables away from moving parts and sharp edges, and secure them with clips so they do not chafe.
After the first trips, inspect the skid plate, brackets and light housings for loose hardware, cracks and scuffs. Textured black finish hides small marks, so look closely at the mounting points and bolt heads instead.
- Check sensor positions before fitting
- Route light wiring with clips and grommets
- Inspect fasteners after the first few trips
Specifications
| Brand | Go Rhino |
|---|---|
| Part number | 5514211T |
| UPC | 887753109620 |
| Finish | Textured black |
| Tubing | 3 in. |
| Lights | 2 3 in. LED lights are included. |
| Mounting location | Front |
| Drilling | No drilling required |
Vehicle fitment
It is a direct fit at the front location. The kit is for the front of a vehicle only, and rear or side mounting is not covered.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Mounting uses the included brackets without drilling. Wire lights through a fused relay and check local road-use rules before installing.
What’s included
Bull bar, mounting brackets, skid plate, 3 in. tubing and 2 3 in. LED lights.









