Overview
The Go Rhino Charger RC2 mounting brackets in black, part number 55525, are steel brackets with a powder coat finish. They are designed as a Charger front bar mount with a distinctive look and are direct fit, not weld-on.
Fit has to be checked against your year, model and trim before buying.
Key features
- Rugged Charger front bar design.
- Steel construction
- Powder coat finish in black
- Direct fit, not weld-on
Before you mount a bracket
Mounting brackets carry the load of the front bar, so they take a lot of stress over time. Steel brackets with a powder coat finish resist scuffs and light corrosion better than bare metal, but chips in the coating should be touched up quickly so rust does not start at the cut edge. When fitting any bracket, check that the bolt holes line up with the frame and that the hardware is snug before the bar takes any load.
A direct-fit bracket saves time, but it still needs a check against the rest of the front end. Look at the bumper, radiator support and any winch or light mounts you plan to add, since these share the same mounting points and can change how the bar sits.
- Inspect for cracks around the bolt holes
- Touch up chips in the powder coat
- Re-tighten hardware after the first drives
- Check clearance for the radiator and cooling fan
Specifications
| Brand | Go Rhino |
|---|---|
| Part number | 55525 |
| UPC | 887753020123 |
| Material | Steel |
| Finish | Powder coat |
| Weld on | Not weld-on |
| Fitment type | Direct fit |
| Color | Black |
Vehicle fitment
No vehicle model is named for these brackets, so compatibility must be matched to the vehicle the bracket is meant for.
Confirm your vehicle’s year, model and trim before ordering.









