Overview
The Fabtech FTS22296 is an offset intrusion beam kit for the Ford Ranger 4WD, which Fabtech describes for 2019 and later model years. The kit replaces the factory intrusion beams in the front fenderwells so that larger tires can be fitted.
The factory beams sit in front of and behind the tire and limit the size of tire that can be fitted. They are also part of the front collision safety structure, so they are replaced rather than cut. The kit provides replacement offset beams, which are welded box sections made from 1/4 inch thick steel, built for strength.
Key features
- Replacement offset intrusion beams, so the factory beams do not have to be modified or removed
- Allows the use of larger tires on the front of the truck
- Welded box design for strength
- Constructed from 1/4 inch thick steel
Working near the crash structure
Intrusion beams sit in the front fenderwells and help the front structure manage a collision, so the replacement needs the same care as the original. A qualified installer should check that the beams are seated fully, that the bolts are tightened properly, and that nothing has been cut or weakened during fitting. Welds on the box sections should be inspected once the parts are in place, since a weak weld matters more than a loose bolt.
Tire fit changes once the beams are replaced, so check clearance at full steering lock and when the suspension compresses. Rubbing can appear on the inner fender or liner, and trimming should be avoided on structural parts. Look over the fenderwell area after the first trail or rough road trip, and check the tire for contact points. Keep the steel protected with paint or coating, since bare steel rusts when exposed to road salt and water.
Specifications
| Brand | Fabtech |
|---|---|
| Part number | FABFTS22296 |
| Type | Offset intrusion beam kit |
| Position | Front, fenderwell |
| Material | Steel, 1/4 inch thick |
| Construction | Welded box design |
| Drivetrain | 4WD |
Vehicle fitment
It fits 2019 and later Ford Ranger 4WD trucks. Confirm your model year, model and trim before ordering.
The fitment data shows only the 2020 model year, so check the model year against the list before ordering. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The kit replaces the factory intrusion beams rather than adding to them. Because those beams are part of the front collision structure, a qualified installer should handle the work.
What’s included
The kit provides the replacement offset intrusion beams. Check the package contents against your installation before starting.













