Overview
Energy Suspension 8.5104G is a front sway bar bushing kit for a 25mm bar, fitting the 1979–1994 Toyota Pickup. It is black polyurethane, sized for a 25mm front bar, and replaces the factory rubber as a direct swap.
Polyurethane is firmer than worn rubber, and zerk fittings allow periodic greasing. Channels in the bushings carry lube to the surfaces that need it.
Key features
- Front sway bar bushing kit for a 25mm bar
- Black polyurethane bushings
- Greaseable with zerk type fittings
- Channels for lube distribution
- Replacement for worn factory rubber
Greasing and bushing life
Polyurethane bushings are firmer than worn rubber, which helps the front bar keep its position, though they transmit more vibration into the frame. Zerk fittings let you grease the bushings at intervals, which keeps them moving freely and quiet. Grease the bushings before the bar starts to squeak, not after.
Before fitting a new kit to an older Toyota Pickup, inspect the frame brackets for rust or bent tabs, since a distorted bracket will wear new bushings quickly. Clean the bar where the bushings sit so the new ones slide on evenly. Tighten the bracket bolts evenly and recheck them after the first few drives.
Trucks used off road or in dusty conditions tend to need more frequent greasing. Check the end links and their fasteners during each service, replacing any that show play or damage. Keeping the bushings clean is the simplest way to extend their life.
Specifications
| Brand | Energy Suspension |
|---|---|
| Part number | 8.5104G |
| UPC | 703639402442 |
| Position | Front |
| Bar diameter | 25mm |
| Color | Black |
| Material | Polyurethane |
| Lubrication | Greaseable, zerk type fittings |
| Fitment type | Direct fit |
Vehicle fitment
The manufacturer list covers the 1979–1994 Toyota Pickup in Base, DLX, SR5 and SR5 Turbo trims.
Toyota Pickup years before 1979 and after 1994 are not on this list, and no other models are named. Confirm your vehicle’s year, model and trim before ordering.
What’s included
The kit is a front sway bar bushing set in black polyurethane. Confirm the contents against your own installation before starting.









